IGCAR Publication

IGCAR Publication during September 2023 (Source: Scopus)

	Nuclear Materials : Physics of Sputtering : A New Approach based on Defect Reactions Krishna K; Tyagi A.K; Tripura Sundari S; Raghavan G. (2023) Advances in Physical Metallurgy (I.F: 2.7), pp. 430-434 Doi: 10.1201/9781003424000-55; CRC Press
	Effect of H2O2 Concentration on Morphology, Reflectivity and Wettability of Silicon Nanowalls Prepared by Metal Assisted Chemical Etching Behera A.K; Viswanath R.N; Mathews T. (2023) Asian Journal of Chemistry (I.F: 2.10), Vol.35(9), pp.2203-22 Doi: 10.14233/ajchem.2023.28099; ISSN: 0970-7077; Asian Publication Corporation
	Investigation of magnetic susceptibility and heat capacity of antiferromagnetic La2TiCoO6 Saha P; Nithya R; Sathyanarayana A.T; Barik M; Kaushik V; Vinod K; Venkatesh R. (2023) Bulletin of Materials Science (I.F: 1.88), Vol.46(4), Art No.189, Doi: 10.1007/s12034-023-03030-1; ISSN: 0250-4707, Springer
	Numerical analysis of solid phase hydrodynamics in a continuous precipitator relevant for plutonium reconversion Panda S.K; Vishnu Anand P; Mishra V.K; Rajeev R; Venkatesan K.A; Ananthasivan K. (2023) Chemical Engineering Research and Design (I.F: 3.9), Vol.198, pp.151-172 Doi: 10.1016/j.cherd.2023.08.046, ISSN: 0263-8762, Institution of Chemical Engineers
	Oxidation behaviour of Ni-base superalloy 617 in simulated Advanced Ultra Supercritical (AUSC) steam Ghule B; Sundaresan C; Ningshen S; Raja V.S. (2023) Corrosion Science (I.F: 8.3), Vol.224, Art No. 111503 Doi: 10.1016/j.corsci.2023.111503; ISSN: 0010-938X, Elsevier Ltd
	Adsorption behavior of ruthenium in tri-n-butyl phosphate functionalized multi walled carbon nanotubes Mohanty B.N; Parida P.K; Bhuyan C.A; BeegamRumana T.N; Laxmi K; Jena H; Ponraju D. (2023) Diamond and Related Materials (I.F: 4.1), Vol.139, Art No.110336 Doi: 10.1016/j.diamond.2023.110336; ISSN: 0925-9635, Elsevier Ltd
	A low-temperature thin film-based multilayered YSZ electrochemical oxygen sensor with ITO as working electrode Ravindranath N.A; Natarajan G; Bahuguna A; Pandian R; Gnanasekar K.I. (2023) ElectrochimicaActa (I.F: 6.6), Vol.467, Art No.143052 Doi: 10.1016/j.electacta.2023.143052; ISSN: 0013-4686, Elsevier Ltd
	Trihalomethanes and physicochemical quality of drinking water in Addis Ababa, Ethiopia Tafesse N; Porcelli M; Hirpessa B.B; Gasana J; Padhi R.K; Robele S; Ambelu A. (2023) Heliyon (4.0), Vol.9(9), Art No. 19446 Doi: 10.1016/j.heliyon.2023.e19446; ISSN: 2405-8440, Elsevier Ltd
	Solving Inverse Problem in Magnetocardiography by Pattern Search Method Swain P.P; Sengottuvel S; Patel R; Mani A; Selvaraj R.J; Satheesh S. (2023) IETE Journal of Research (I.F: 1.5), Vol.69(7), pp.4001-4011 Doi: 10.1080/03772063.2021.1946436; ISSN: 0377-2063, Taylor and Francis Ltd
	Defects induced metallized boron hydride monolayers as high-performance hydrogen storage architecture Ian Jason J; Pal Y; Anees P; Lee H; Kaewmaraya T; Hussain T; Panigrahi P. (2023) International Journal of Hydrogen Energy (I.F: 7.2), Doi: 10.1016/j.ijhydene.2023.07.195; ISSN: 0360-3199, Elsevier Ltd
	Real-time sub-assembly identification through IMU data fusion with vision sensor for an inspection system Thirumalaesh A; Nibarkavi N.A; Winston S.J; Jose J; Rathika P.D. (2023) International Journal of Nuclear Energy Science and Technology(I.F: 2.7), Vol. 16(2), pp.80-96 Doi: 10.1504/IJNEST.2023.132651; ISSN: 1741-6361, Inderscience Publishers
	Optimization modelling of spark plasma sintering parameters of SS316-B4C composite Baranidharan K; Kumaran S.T; Uthayakumar M; Parameswaran P. (2023) International Journal on Interactive Design and Manufacturing (I.F: 2.1), Doi: 10.1007/s12008-023-01509-z; ISSN: 1955-2513, Springer
	Exploring phosphoryl oxygen basicity in U(VI) complexation: A comparative study from trialkyl phosphate to phosphine oxide Sachin A.R; Gopakumar G; Rao C.V.S.B; Nagarajan S. (2023) Journal of Computational Chemistry (I.F: 3.0) Doi: 10.1002/jcc.27219; ISSN: 0192-8651, John Wiley and Sons Inc
	Interface structure and bias dependence of VN/AlN/VN tunnel junction: A semi-empirical calculation Harikumar P; Gupta M; Nanda B.R.K; Chandra S. (2023) Journal of Magnetism and Magnetic Materials (I.F: 2.7), Vol.586, Art No. 171191 Doi: 10.1016/j.jmmm.2023.171191; ISSN: 0304-8853, Elsevier B.V.
	Hybrid Welding Process in Lieu of Conventional Practices for Fabrication of Austenitic Stainless Steel AISI 304L Components in Nuclear Facility Kuppusamy M.V; Venkatraman B; Albert S.K; Athmalingam S. (2023) Journal of Materials Engineering and Performance (I.F: 2.3), Vol.32(7), pp.7664-7673 Doi: 10.1007/s11665-022-07658-8; ISSN: 1059-9495, Springer
	Solubility of di-cyclohexylhydrogenphosphonate in supercritical carbon dioxide medium: Application towards the recovery of uranium from aqueous solution Rajani P; Pitchaiah K.C; Sreenivasulu B; BrahmanandaRao C.V.S; Sivaraman N. (2023) Journal of Molecular Liquids (I.F: 6), Vol.390, Art No.123054 Doi: 10.1016/j.molliq.2023.123054; ISSN: 0167-7322, Elsevier B.V.
	Treatment of laboratory generated radioactive organic liquid waste using a novel ionic liquid based resin: A feasibility study Rout A; Ramanathan N. (2023) Journal of Molecular Liquids (I.F: 6), Vol.390, Art No.123079 Doi: 10.1016/j.molliq.2023.123079; ISSN: 0167-7322, Elsevier B.V.
	Hydrogen Adsorption Behavior of Highly Stable Assorted Functionalized UiO-66-MOFs at Low Pressures: A Combined Experimental and DFT Study Vaddanam V.S; Bootharajan M; Sengupta S; Balija S; BrahmanandaRao C.V.S; Suresh A. (2023) Journal of Physical Chemistry C Doi: 10.1021/acs.jpcc.3c03151; ISSN: 1932-7447, American Chemical Society
	Characterization of neutron spectrum parameters in PFTS irradiation channel of KAMINI reactor and validation of Westcott formalism using k0 IM-NAA Chand M; Bagchi S; Rao J.S.B; Elumalai M; Kumar G.V.S.A. (2023) Journal of Radioanalytical and Nuclear Chemistry (I.F: 1.6) Doi: 10.1007/s10967-023-09129-3; ISSN: 0236-5731, Springer
	Pyrohydrolytic separation of fluoride and chloride in U–Zr and U–Pu–Zr metallic fuel alloys through oxidation accompanied by estimation using ion chromatography Bootharajan M; Hemalatha V; Vithya J; Saha D; Jain A; Ramanathan N; Sundararajan K. (2023) Journal of Radioanalytical and Nuclear Chemistry (I.F: 1.6) Doi: 10.1007/s10967-023-09156-0; ISSN: 0236-5731, Springer
	Speciation of nitric acid third phase in a 30%TBP/n-dodecane solvent Kumar S. (2023) Journal of Radioanalytical and Nuclear Chemistry (I.F: 1.6) Doi: 10.1007/s10967-023-09155-1; ISSN: 0236-5731, Springer
	Experimental Study and Numerical Simulation of Y2O3 Coatings Deposited by Plasma Spraying at Different Torch Powers Madhura B; Patel P.R; Vetrivendan E; Rao C.J; Ningshen S. (2023) Journal of Thermal Spray Technology (I.F: 3.1) Doi: 10.1007/s11666-023-01653-8; ISSN: 1059-9630, Springer
	Seismic Response of Coupled Structure, Equipment and Piping System with and Without Base Isolation An Experiment Reddy G.R; Sajish S.D; Ravikiran A; Preetha R; Singh T; Mohanraj P; Verma R.K; Mohanraj K.V; Parmar R.M; Rajesh S.K; Mahesh Kumar R; Suresh N; Deb S.K. (2023) Lecture Notes in Civil Engineering, Vol.330, pp.817-835 Doi: 10.1007/978-981-99-1604-7_62; ISSN: 2366-2557, Springer
	A Study on Rayleigh Plateau Instability in Slender Jets of Nuclear Materials Chandra Kumar M; JasminSudha A; Subramanian V; Venkatesan R; Athmalingam S; Venkatraman B. (2023) Lecture Notes in Mechanical Engineering, pp. 725-734 Doi: 10.1007/978-981-99-1288-9_75; ISSN: 2195-4356, Springer
	Influence of thermomechanical processing and tempering temperature on tensile flow and work hardening behaviour of India specific reduced activation ferritic martensitic steel Kumar P.A; Vanaja J; Prasad Reddy G.V; NageswaraRao G.V.S. (2023) Materials Science and Engineering: A (I.F: 6.4), Vol.886, Art No. 145701 Doi: 10.1016/j.msea.2023.145701; ISSN: 0921-5093, Elsevier Ltd
	Uncapped SnO2 quantum dots for selective adsorption, separation and photocatalytic degradation of a mixture of dyes Reshma T.S; Pan S; Das A. (2023) New Journal of Chemistry(I.F: 3.3), Vol.47(34), pp.16136-16147 Doi: 10.1039/d3nj02773b; ISSN: 1144-0546, Royal Society of Chemistry
	Pump availability prediction using response surface method in nuclear plant Suganya P; Swaminathan G; Anoop B. (2023) Nuclear Engineering and Technology (I.F: 2.7) Doi: 10.1016/j.net.2023.09.002; ISSN: 1738-5733, Korean Nuclear Society
	Nuclear Fuel Reprocessing BrahmanandaRao C.V.S; Achutan P.V; Sivaraman N. (2023) Nuclear Fuel Cycle , pp.213-253 Doi: 10.1007/978-981-99-0949-0_7; Springer Nature
	Post Irradiation Examination of Fuel Mishra P; Karthik V; Shah P.K. (2023) Nuclear Fuel Cycle, pp.185-212 Doi: 10.1007/978-981-99-0949-0_6; Springer Nature
	Effect of reverse voltage on alpha spectra of pre-conditioned Si PIN diodes deployed in vacuum/ambient environment Karrevula V.R; Prabakar K; Raghu Ramaiah M; Sheela O.K; Tripurasundari S. (2023) Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment (I.F: 1.4), Vol.1056, Art no. 168668 Doi: 10.1016/j.nima.2023.168668; ISSN: 1689002, Elsevier B.V.
	Response of Photonic Hydrogels of Homogeneous Particles to Uranyl Ions in Aqueous Solutions Joshi R.G; Gupta D.K; Amesh P; Parida P.K; Ravindran T.R. (2023) Photonic Sensors (I.F: 1.4), Vol.13(4), Art No. 230417 Doi: 10.1007/s13320-023-0695-8; ISSN: 1674-9251, Springer Verlag
	Origin of bound exciton emission in CVD-grown monolayer MoS2 Madapu K.K; Bhuyan C.A; Dhara S. (2023) Physical Review B (I.F: 3.7), Vol.108(8). Art No. 85429 Doi: 10.1103/PhysRevB.108.085429; ISSN: 2469-9950, American Physical Society
	Valorisation of algal biomass to value-added metabolites: emerging trends and opportunities Uma V.S; Usmani Z; Sharma M; Diwan D; Sharma M; Guo M; Tuohy M.G; Makatsoris C; Zhao X; Thakur V.K; Gupta V.K. (2023) Phytochemistry Reviews (I.F: 7.7), Vol.22(4), pp.1015-1040 Doi: 10.1007/s11101-022-09805-4; ISSN: 1568-7767, Springer
	Surface mount multilayer ceramic capacitors as optically stimulated luminescent dosimeters Panda M; Joshi S; Annalakshmi O; Srinivas C.V; Venkatraman B. (2023) Radiation Physics and Chemistry (I.F: 2.9), Vol. 213, Art No. 111253 Doi: 10.1016/j.radphyschem.2023.111253; ISSN: 0969-806X, Elsevier Ltd

IGCAR Publication during August 2023 (Source: Scopus)

	Contactless Palm Recognition System, Hanumara V; Medidi S.R; Arumugam P; Vydeki D.(2023) 2023- 4th International Conference for Emerging Technology, INCET 2023, 26-28 May 2023 Doi:10.1109/INCET57972.2023.10170162; Institute of Electrical and Electronics Engineers Inc.
	Highly Porous Polypyrrole (PPy) Hydrogel Support for the Design of a Co-N-C Electrocatalyst for Oxygen Reduction Reaction Parida S.K; Barik T; Chalke B.A; Amirthapandian S; Jena H. (2023) ACS Applied Materials and Interfaces, (I.F:9.50) Vol.15 (31) pp.37571-37579 ISSN:1944-8244 Doi:10.1021/acsami.3c08022; American Chemical Society
	Ceramic coated surface for corrosion and wear resistance Das S; Mukherjee S; Jain A.(2023) Advanced Ceramic Coatings: Fundamentals, Manufacturing, and Classification pp.269-315 Doi:10.1016/B978-0-323-99659-4.00015-2; Elsevier
	Mechanistic assessment of aerosol transport in an SFR cover gas space under operating condition Patel P.R; Kumar A; Arul A.J.(2023) Aerosol Science and Technology (I.F:5.20) Vol.57 (9) pp.842-860 ISSN:0278-6826; Doi:10.1080/02786826.2023.2232428; Taylor and Francis
	A method for noninvasive beat-by-beat visualization of His bundle signals Sengottuvel S; Shenbaga Devi S; Sasikala M; Satheesh S; Selvaraj R.J.(2023) Annals of Noninvasive Electrocardiology (I.F:1.90) ISSN:1082-720X Doi:10.1111/anec.13076; John Wiley and Sons
	Magnetic and robust dielectric properties in distorted double perovskite Gd2CuTiO6 Saha P; Nithya R; Sarguna R.M; Sathyanarayana A.T.(2023) Applied Physics A: Materials Science and Processing (I.F:2.70) Vol.129(9) Art. 624 ISSN:0947-8396 Doi:10.1007/s00339-023-06885-7; Springer Science and Business Media Deutschland GmbH
	A study on the competition and synergy between irradiation and temperature on the texture and recrystallization of nanocrystalline nickel Julie S; Mariappan K; David C; Wasekar N.P; Shankar V.(2023) Applied SurfaceScience (I.F:6.70) Vol.638 Art.158085 ISSN:0169-4332 Doi:10.1016/j.apsusc.2023.158085; Elsevier B.V.
	π-hole driven N⋅⋅⋅O/N⋅⋅⋅π Pnicogen and C⋅⋅⋅O Tetrel Bonding inNitromethane-Carbonyl Dimers: Comprehensive Study using Matrix Isolation Infrared Spectroscopy and Quantum Chemical Computations Mahapatra N; Chandra S; Ramanathan N; Sundararajan K.(2023) ChemistrySelect (I.F:2.10) Vol.8(32) ISSN:2365-6549 Doi:10.1002/slct.202302817; John Wiley and Sons Inc
	Nitrile derivative functionalized graphene oxide membranes for efficient separation of strontium from aqueous waste Vishwakarma R.K; Narayanam P.K; Sriram S.(2023) Colloids and Surfaces A: Physicochemical and Engineering Aspects (I.F:5.20) Vol.674 Art.131894 ISSN:0927-7757 Doi:10.1016/j.colsurfa.2023.131894; Elsevier
	Type-I to Type-II non-Masing behavior of 304L SS under low cycle fatigue: Material's internal changes Yadav S.S; Roy S.C; Veerababu J; Goyal S. 2023) International Journal of Fatigue (I.F:6.00) Vol.175 Art.107789 ISSN:0142-1123 Doi:10.1016/j.ijfatigue.2023.107789; Elsevier
	Investigation of dilute ferromagnetism induced at room temperature in undoped crystalline AlN thin film after isothermal annealing in a controlled oxygen environment Nath D; Chakravarty S; Gupta M; Deshpande U.P; Bhuyan C.A; Shekar N.V.C.(2023) Journal of Alloys and Compounds (I.F:6.20) Vol.967 Art.171727 ISSN:0925-8388 Doi:10.1016/j.jallcom.2023.171727; Elsevier
	Luminescence studies of high color purity red-emitting CaAl4O7:Eu3+ phosphor prepared by microwave- assisted synthesis technique Panda R; Behera M; Kumar R.A; Joshi D; Padhi R.K.(2023) Journal of Alloys and Compounds (I.F:6.20) Vol.968 Art.171879 ISSN:0925-8388 Doi:10.1016/j.jallcom.2023.171879; Elsevier
	Thermo-physical properties and microstructural characteristics of U-xZr (x = 40.5, 52 & 75 wt%) alloys Mollah M.M.R; Samanta B; Das S; Ghosh P; Jain A; Joseph K.(2023) Journal of Alloys and Compounds (I.F:6.200 Vol. 965 Art. 171443 ISSN:0925-8388 Doi:10.1016/j.jallcom.2023.171443; Elsevier
	Competition between full slip and twinning in BCC-Fe: Effect of preloaded stress and temperature Veerababu J; Nagesha A.(2023) Journal of Applied Physics (I.F:3.20) Vol.134(5) Art. 55102 ISSN:0021-8979 Doi:10.1063/5.0154055; American Institute of Physics
	Use of Purgeless Gas Tungsten Arc Welding (GTAW) of Small Bore SS 304L Pipes for Reduction of Oxidation Weld Defect in Nuclear Piping Applications: A Field Deployment Approach Kuppusamy M.V; Venkatraman B; Dhananjeyakumar M; Palani K.(2023) Journal of Failure Analysis and Prevention (I.F:1.20) ISSN:1547-7029 Doi:10.1007/s11668-023-01723-7; Springer
	Fabrication of reusable probe impregnated polymer monolithic sensor for the visual detection of Cd2+ in natural waters and cigarette samples Pedugu Sivaraman S; Krishna Kumar S; Srinivasan P; Madhu D.K; Kancharlapalli Chinaraga P; Nagarajan S; C.V.S. Rao B; Deivasigamani P; Mohan A.M.(2023) Journal of Hazardous Materials (I.F:14.22) Vol.459 Art. 132248 ISSN:0304-3894 Doi:10.1016/j.jhazmat.2023.132248; Elsevier
	Rapid and selective removal of toxic and radioactive anionic pollutants using an ionic covalent organic framework (iCOF-2) Hassan A; Mollah M.M.R; Das S; Das N.(2023) Journal of Materials Chemistry (I.F:11.90) ISSN: 2050-7488 Doi:10.1039/d3ta02557h; Royal Society of Chemistry
	An assessment of thermal behaviour and gamma radiation stability of lanthanide-doped aluminium phosphate glasses for immobilization of minor actinides Barik S.K; Senapati A; Balakrishnan S; Ananthasivan K.(2023) Journal of Materials Research (I.F:2.70) ISSN:0884-2914 Doi:10.1557/s43578-023-01121-7; Springer Nature
	A combined spectroscopic and theoretical study to investigate the coordination modes of 2,3- and 3,4- pyridine dicarboxylates with Eu(III) Kumar S; Maji S; Sundararajan K.(2023) Journal of Molecular Liquids (I.F:6.00) Vol.386 Art. 122545 ISSN:0167-7322 Doi:10.1016/j.molliq.2023.122545; Elsevier
	Thermochemical Properties Over LiCl-KCl-UCl3 Ternary Salt System: Knudsen Effusion Mass Spectrometric Study Trinadh V.V; Manikandan P; Bera S; Brahmananda Rao C.V.S; Lakshmi Narasimhan T.S.(2023) Journal of Phase Equilibria and Diffusion (I.F:1.40) ISSN:1547-7037 Doi:10.1007/s11669-023-01053-z; Springer
	Accurate Evaluation of Dispersion Energies at Coupled Cluster Level to Understand the Substituent Effects in Am(III) and Eu(III) Complexes Sachin A.R; Gopakumar G; Brahmananda Rao C.V.S.(2023) Journal of Physical Chemistry A (I.F:2.90) ISSN:1089-5639 Doi:10.1021/acs.jpca.3c03027; American Chemical Society
	Thermoluminescence properties of quartz a natural dosimeter from beach sand Kumar A.A; Annalakshmi O; Sundarakannan B.(2023) Journal of Radioanalytical and Nuclear Chemistry (I.F:1.60) ISSN:0236-5731 Doi:10.1007/s10967-023-09107-9; Springer Science and Business Media
	High pressure studies of MgCu2O3 compound Chandra S; Shukla B; Srihari V; Kaur G; Bhalerao G.M; Chandra Shekar N.V; Govindaraj R.(2023) Journal of Solid State Chemistry (I.F:3.60) Vol.327 Art. 124249 ISSN: 0022-4596 Doi:10.1016/j.jssc.2023.124249; Academic Press
	Experimental Evidences for Quantum Spin Liquid Ground State in Layered Hexagonal Y2CuTiO6 Saha P; Nithya R; Sathyanarayana A.T; Kaushik V; Gururaj K; Deshpande U; Venkatesh R.(2023) Journal of Superconductivity and Novel Magnetism (I.F:1.80) ISSN:1557-1939 Doi:10.1007/s10948-023-06611-7; Springer
	PANI and PPy-Based Biosensing of Salt Stress in Plants: An Electrochemical Approach Sneha M; Ravindranath N.A; Sriram S; Rao J.S.B; Keshari A.K; Jayaraman V.(2023) Journal of the Electrochemical Society (I.F:3.90) Vol.170(8) Art. 85501 ISSN:0013-4651 Doi:10.1149/1945-7111/aced6d; Institute of Physics
	Multiple Carbon Morphologies Derived from Polyion Complex-Based Double Hydrophilic Block Copolymers as Templates and Phenol as a Carbon Precursor Sivanantham M; Senthamaraikannan R; Dirisala A; Ghosh C; Ray D; Tewari C; Padamati R; Choudhury S; Jung Y.C.(2023) Langmuir (I.F:3.90) Vol.39(31) pp.10756-10768 ISSN:7043-7463 Doi:10.1021/acs.langmuir.2c03364; American Chemical Society
	Mapping and Visualization of Constrained Internal Spaces Using a 2-DoF Robotic System Venkata Nagarjun P.M; Hirshik Ram S; Winston J; Mahendra Prabhu N; Jose J.(2023) Lecture Notes in Mechanical Engineering, pp.57-66 ISSN: 2195-4356 Doi: 10.1007/978-981-99-1665-8_6; Springer Science and Business Media Deutschland GmbH
	Realization of high performance PZN-PT single crystal based piezoelectric flexural mode hydrophone for underwater sensor applications Manikandan C; Varadarajan E; Vijayakumar P; Ramesh R; Roy V; Sarguna R.M; Amaladass E.P; Ganesamoorthy S; Vinodkumar T.K; Unni M.N; Venkataraman C.S.N; Natarajan V; Babu S.M.(2023) Materials Research Express (I.F:2.30) Vol.10 (6) Art. 66303 ISSN: 2053-1591 Doi:10.1088/2053-1591/acdfbd; Institute of Physics
	An overview on the microstructure and properties of Fe/Ti based dissimilar joints Prasanthi T.N; Sudha C; Saroja S.(2023) Materials Science and Technology (United Kingdom) (I.F:1.80) ISSN:0267-0836 Doi:10.1080/02670836.2023.2229604; Taylor and Francis
	Effective strategy of optimized dielectric, energy storage and piezoelectric performances in La3+and Sr2+ co- doped PIMNT 42/26/32 relaxor ferroelectric ceramics Gowthami S; Anandha Babu G; Manikandan C; Sarguna R.M.(2023) Materials Science in Semiconductor Processing (I.F:4.10) Vol.166 Art. 107688 ISSN:1369-8001 Doi: 10.1016/j.mssp.2023.107688; Elsevier
	Weldability study of 304HCu stainless steel using varestraint and "Gleeble" based hot ductility tests Divya M; Prasanthi T.N; Das C.R; Sudha C; Vasudevan M; Metallurgy & Materials Group(2023) Materials Today Communications (I.F: 3.80) Vol. 37 Art. 106938 ISSN:2352-4928 Doi:10.1016/j.mtcomm.2023.106938; Elsevier
	A simulation study on the recirculation effect of land-sea breeze flows on atmospheric dispersion of airborne releases in Southeast coast of India Reddy B.R; Srinivas C.V; Venkatraman B.(2023) Meteorology and Atmospheric Physics (I.F:2.00) Vol. 135 (5) Art. 47 ISSN:0177-7971 Doi:10.1007/s00703-023-00983-0; Springer
	Highly efficient post-synthetically modified UiO-66 MOF for the extraction of Pd(ii) from aqueous solutions: experimental and theoretical studies Sengupta S; Sahoo M; Sravani V.V; Sreenivasulu B; Rao C.V.S.B; Suresh A.(2023) New Journal of Chemistry (I.F:3.30) ISSN:1144-0546 Doi:10.1039/d3nj02770h; Royal Society of Chemistry
	Development and validation of an empirical method to determine summing correction factors of long lived gamma ray emitting radionuclides in the environment Margret M; Chandrasekaran S; Srinivas C.V.(2023) Nuclear and Particle Physics Proceedings ISSN:2405-6014 Doi:10.1016/j.nuclphysbps.2023.07.001; Elsevier
	Estimation of neutron source strength for external source subassembly in PFBR using GEANT4 Chakraborty A; Prasad R.R; Shanthi M.M; Kumar D.S; Arul A.J.(2023) Nuclear and Particle Physics Proceedings ISSN:2405-6014 Doi:10.1016/j.nuclphysbps.2023.07.012; Elsevier
	Thermoluminescence dosimetric characteristics of natural zircon Kumar A.A; Annalakshmi O; Komathi M.G; Sundarakannan B.(2023) Nuclear and Particle Physics Proceedings ISSN:2405-6014 Doi:10.1016/j.nuclphysbps.2023.07.010; Elsevier
	Influence of seismic isolation on the earthquake response of internal components in a fast reactor Saboo A; Khan M; Kumar M; Sajish S.D.(2023) Nuclear Engineering and Design (I.F:1.70) Vol.413 Art.112522 ISSN:0029-5493 Doi:10.1016/j.nucengdes.2023.112522; Elsevier
	Numerical simulation of localization of a sub-assembly with failed fuel pins in the prototype fast breeder reactor Bachchan A; Hazra P; Sundaram N; Kirtan S; Chaudhary N; Riyas A; Devan K.(2023) Nuclear Engineering and Technology (I.F:2.70) ISSN:1738-5733 Doi:10.1016/j.net.2023.06.030; Korean Nuclear Society
	A comparative analysis on the spectroscopic qualities of modifiers and Sm3+ ions integrated bismuth boro- tellurite glasses for visible orange appliances Evangelin Teresa P; Naseer K.A; Padhi R.K; El Shiekh E; Marimuthu K.(2023) Optical Materials (I.F:3.90)Vol.143 Art.114272 ISSN:0925-3467 Doi:10.1016/j.optmat.2023.114272; Elsevier
	Surfactant-Free Facile Synthesis of Ag/rGONanohybrid for SERS-Based Detection of Melamine Gokulakrishnan J; Manojkumar P.A; Koppole K.(2023) Plasmonics (I.F:3.00) ISSN:1557-1955 Doi:10.1007/s11468-023-01999-3; Springer
	Effect of mating material on wear behaviour of Ni-based hardface coating Kumar H; Mishra R.K; Harmain G.A.U.(2023) Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (I.F:2.40) ISSN:1464-4207 Doi:10.1177/14644207231190492; SAGE Publications
	Effect of morphological properties on the particle size distribution measurements and modelling of porous andnonspherical aerosol behaviour Pujala U; Subramanian V; Anand S; Venkatraman B.(2023) Progress in Nuclear Energy (I.F:2.70) Vol.163 Art.104811 ISSN:0149-1970 Doi:10.1016/j.pnucene.2023.104811; Elsevier
	New insights into defects and magnetic interactions inducing lattice disordering in Co2Fe0.5Cr0.5Al Yadav R.K; Govindaraj R; Vinod K; Sreepriya T; Mythili R.(2023) RSC Advances (I.F:3.9) Vol.13(28) pp.19106-19118 ISSN:2046-2069 Doi:10.1039/d2ra08318c; Royal Society of Chemistry
	Adsorption kinetics and equilibrium performance of Di-n-butyl phosphate on XAD-4 and XAD-7 from alkaline medium Murali R; Ganesh S; Trika R; Desigan N; Rajeev R; Venkatesan K.A; Ananthasivan K.(2023) Separation Science and Technology (Philadelphia) (I.F:2.80) ISSN:0149-6395 Doi:10.1080/01496395.2023.2240495; Taylor and Francis Ltd.
	Non-destructive Materials Characterization by Electromagnetic Techniques Arnold W; Goebbels K; Kumar A.(2023) Springer Series in Materials Science Vol.329 pp.239-311 ISSN:0933-033X Doi:10.1007/978-3-662-66489-6_3; Springer Science and Business Media Deutschland GmbH
	Non-destructive Materials Characterization using Ionizing Radiation Arnold W; Goebbels K; Kumar A.(2023) Springer Series in Materials Science Vol.329 pp.135-238 ISSN:0933-033X Doi:10.1007/978-3-662-66489-6_2; Springer Science and Business Media Deutschland GmbH
	Ultrasonic Non-destructive Materials Characterization Arnold W; Goebbels K; Kumar A.(2023) Springer Series in Materials Science Vol.329 pp.1-134 ISSN:0933-033X Doi:10.1007/978-3-662-66489-6_1; Springer Science and Business Media Deutschland GmbH
	Electrochemical Polarization Studies on Spark Sintered SS316-B4C Composite Baranidharan K; Kumaran S.T; Uthayakumar M; Parameswaran P.(2023) Surface Review and Letters (I.F:1.10) Art.2350070 ISSN:0218-625X Doi:10.1142/S0218625X23500701; World Scientific
	A polypyrrole derived nitrogen doped porous carbon support for an atomically dispersed Mnelectrocatalyst for the oxygen reduction reaction Parida S.K; Barik T; Jena H.(2023) Sustainable Energy and Fuels (I.F:5.60) Vol.7(15) pp.3684-3691 ISSN:2398-4902 Doi:10.1039/d3se00495c; Royal Society of Chemistry
	Ion conduction property and electrochemical characteristics of Ag-ion gel polymer electrolyte Parthiban V; Sundari G.S; Rao C.V.S.B; Erothu H.(2023) Synthetic Metals (I.F:4.40) Vol.(298) Art.117416 ISSN:0379-6779 Doi:10.1016/j.synthmet.2023.117416; Elsevier
	The Influence of Plastic Strain and Microstructure on the Electrochemical Noise Response of AA 7004 in 0.6 M NaCl Agrawal R.K; Upadhyay N; Raja V.S.(2023) Transactions of the Indian Institute of Metals (I.F:1.60) ISSN:0972-2815 Doi:10.1007/s12666-023-03070-5; Springer

IGCAR Publication during July 2023 (Source: Scopus)

	A polypyrrole derived nitrogen doped porous carbon support for an atomically dispersed Mn electrocatalyst for the oxygen reduction reaction; Parida S.K; Barik T; Jena H. Sustainable Energy and Fuels; (I.F:5.6); 2023, Vol.7(15); pp.3684-3691; Doi:10.1039/d3se00495c; ISSN:23984902; RSC.
	Additives in concrete to enhance neutron attenuation characteristics - A critical review; Gokul P; Ashok Kumar J; Preetha R; Chattopadhyaya S; Mini K.M. Results in Engineering; 2023, (I.F:5); Vol.19, Art.101281; Doi:10.1016/j.rineng.2023.101281; ISSN:25901230; Elsevier B.V.
	An overview on the microstructure and properties of Fe/Ti based dissimilar joints; Prasanthi T.N; Sudha C; Saroja S. Materials Science and Technology (United Kingdom); 2023, (I.F:1.8); Doi:10.1080/02670836.2023.2229604; ISSN:2670836; Taylor and Francis Ltd.
	Analysis of unprotected loss of flow accident in a sodium cooled fast reactor using coupled thermal hydraulics neutronics code ASTRA Narendran Y; Natesan K; Devan K; John Arul A. Progress in Nuclear Energy; (I.F:2.7); (2023) Vol.163 Art.104801; Doi:10.1016/j.pnucene.2023.104801; ISSN:1491970; Elsevier Ltd.
	Anisotropic magnetic and magnetotransport properties in morphologically distinct Nd0.6Sr0.4MnO3 thin films Mrinaleni R.S; Amaladass E.P; Sathyanarayana A.T; Amirthapandian S; Jegadeesan P; Gupta P; Geetha Kumary T; Rai S.K; Mani A. Physica Scripta; (I.F:2.9); (2023) Vol.98 (7); Art.75919; Doi:10.1088/1402-4896/acd733; ISSN:318949; Institute of Physics.
	Chromoionophoric probe imbued porous polymer monolith as a Three-in-One Solid-state Naked-eye sensor for the selective sensing and recovery of Ultra-trace Lead, Mercury, and cadmium ions from Industrial/Environmental samples Srinivasan P; Madhu D.K; Pedugu Sivaraman S; Nagarajan S; Rao C.V.S.B; K Chinaraga P; Mohan A.M; Deivasigamani P Chemical Engineering Journal; (I.F:15.1); (2023) Vol.471, Art.144627; Doi:10.1016/j.cej.2023.144627; ISSN:13858947; Elsevier B.V.
	CO2-NH3 dimers: Dominance of π-hole driven tetrel bonding over hydrogen bonding; Chandra S; Mahapatra N; Ramanathan N; Sundararajan K. Chemical Physics Letters; (I.F:2.8); (2023) Vol.828, Art.140722; Doi:10.1016/j.cplett.2023.140722; ISSN: 009-2614; Elsevier B.V.
	Comparative and inter-conversion analysis of dry and wet methods of particle size distribution using a test case of batch sedimentation; Panda S.K; Aashranth B; Vishnu Anand P; Rajeev R; Venkatesan K.A; Ananthasivan K.; Brazilian Journal of Chemical Engineering; (I.F:1.2); (2023) Vol.40(2); pp.555-572 Doi:10.1007/s43153-022-00244-4ISSN:1046632; Springer Science and Business Media Deutschland GmbH
	Corrosion inhibition capabilities of aluminium thin films on AZ31 magnesium alloy; Marndi S.K; Raman P; Sankarakumar A; Nagamony P; Thangadurai P.; Materials Science and Technology (United Kingdom); (I.F:1.8); (2023) Doi:10.1080/02670836.2023.2226487; ISSN:0267-0836; Taylor and Francis Ltd.
	Current redistribution model of anomalous resistance behaviour in superconductor-topological insulator heterostructures; Abhirami S; Amaladass E.P; Sharma P; Vinod K; Thanikaiarasu A.V; Mani A.; Superconductor Science and Technology; (I.F:3.6); (2023) Vol.36 (8), Art.85019; Doi:10.1088/1361-6668/ace386; ISSN: 0953-2048; Institute of Physics
	Descriptor sliding mode observer based fault tolerant control for nuclear power plant with actuator and sensor faults; Surjagade P.V; Deng J; Shimjith S.R; Arul A.J.; Progress in Nuclear Energy; (I.F:2.7); (2023) Vol.162; Art.104774; Doi:10.1016/j.pnucene.2023.104774; ISSN:0149-1970; Elsevier Ltd
	Effect of B and N Content and Austenitization Temperature on the Tensile and Impact Properties of Modified 9Cr-1Mo Steels; Rejeesh R; Barik R.K; Mitra R; Kostryzhev A; Das C.R; Albert S.K; Chakrabarti D.; Metals; (I.F:2); (2023) Vol.13 (6); Art.1124; Doi:10.3390/met13061124; ISSN: 2075-4701; MDPI
	Effect of flaw orientation on magnetic flux leakage and remote field eddy current inspection of small diameter steel tubes; Singh W.S; Thirunavukkarasu S; Kumar A.; Nondestructive Testing and Evaluation; (I.F:2.6); (2023) Vol.38(4); pp.553-571 Doi:10.1080/10589759.2022.2137508; ISSN:1058-9759; Taylor and Francis Ltd.
	Effect of morphological properties on the particle size distribution measurements and modelling of porous and nonspherical aerosol behaviour; Pujala U; Subramanian V; Anand S; Venkatraman B.; Progress in Nuclear Energy; (I.F:2.7); (2023) Vol.163, Art.104811; Doi:10.1016/j.pnucene.2023.104811; ISSN: 0149-1970; Elsevier Ltd
	Effective strategy of optimized dielectric, energy storage and piezoelectric performances in La3+ and Sr2+ co-doped PIMNT 42/26/32 relaxor ferroelectric ceramics; Gowthami S; Anandha Babu G; Manikandan C; Sarguna R.M.; Materials Science in Semiconductor Processing; (I.F:4.1); (2023) Vol.166; Art.107688; Doi:10.1016/j.mssp.2023.107688; ISSN: 1369-8001; Elsevier Ltd
	Electron-Gamma Spectroscopic Studies in 131Xe from the 131I Decay; Sai K.V; Seetharaman D; Gopal A.R; Rao K.M; Pradeep A.S; Venkataramaniah K.; Physics of Atomic Nuclei; (I.F:0.4); (2023) Vol.86 (3); pp.221-228 Doi:10.1134/S1063778823030146; ISSN:1063-7788; Pleiades Publishing
	Enhanced temperature coefficient of resistance in nanostructured Nd0.6Sr0.4MnO3 thin films; Mrinaleni, RS; Amaladass E.P; Amirthapandian S; Sathyanarayana A.T; P J; Ganesan K; Ghosh C; Sarguna R.M; Rao P.N; Gupta P; Kumary T.G; Dasgupta A; Rai S.K; Mani A.; Thin Solid Films; (I.F:2.1); (2023) Vol.779; Art.139933; Doi:10.1016/j.tsf.2023.139933; ISSN:406090; Elsevier B.V.
	Fabrication of CeO2 microspheres by internal gelation process using flow-focusing droplet generator; Yadav S; Chaturvedi A.R; Gaikwad G; Ananthasivan K; Pandit A.B; Jain R.D.; Canadian Journal of Chemical Engineering; (I.F:2.1); (2023) Vol.101 (8); pp.4493-4505 Doi:10.1002/cjce.24792; ISSN:84034; John Wiley and Sons Inc
	Feasibility of using the mixture of two symmetrical diglycolamides instead of unsymmetrical diglycolamide solvent for the separation of trivalent actinides; Ravi J; Parvathy N; Desigan N; Ananthasivan K.; Journal of Radioanalytical and Nuclear Chemistry; (I.F:1.6); (2023) Vol.332; pp.3161-3171 Doi:10.1007/s10967-023-09029-6; ISSN:0236-5731; Springer Science and Business Media B.V.
	Generation of allowable stress for indigenously developed 304HCu Stainless steel; Ganesh Kumar J; Ganesan V; Nandagopal M; Reddy G.V.P.; International Journal of Pressure Vessels and Piping; (I.F:3); (2023) Vol.206; Art.105015; Doi:10.1016/j.ijpvp.2023.105015; ISSN:0308-0161; Elsevier Ltd
	High temperature sliding wear behavior of detonation sprayed Ni-5wt%Al coating; Purushotham, N; Parthasarathi, NL; Suresh Babu, P; Sivakumar, G; Wear; (I.F:5); (2023) Vol.530-531, Art.205030; Doi:10.1016/j.wear.2023.205030; ISSN:0043-1648; Elsevier Ltd
	Mechanistic assessment of aerosol transport in an SFR cover gas space under operating condition; Patel P.R; Kumar A; Arul A.J.; Aerosol Science and Technology; (I.F:5.2); (2023); Vol.57(9); pp.842-860 Doi:10.1080/02786826.2023.2232428; ISSN:0278-6826; Taylor and Francis Ltd.
	Molten Salt Corrosion Behavior of CVD-Synthesized Pyrolytic Graphite as Anode for Direct Electrodeoxidation Process; Hareesh R; Vetrivendan E; Sanil N; Kumaresan R; Ningshen S.; Journal of Materials Engineering and Performance; (I.F:2.3); (2023) Doi:10.1007/s11665-023-08456-6; ISSN:1059-9495; Springer
	New insights into defects and magnetic interactions inducing lattice disordering in Co2Fe0.5Cr0.5Al; Yadav R.K; Govindaraj R; Vinod K; Sreepriya T; Mythili R.; RSC Advances; (I.F:3.9); (2023) Vol.13(28); pp.19106-19118; Doi:10.1039/d2ra08318c; ISSN: 2046-2069; Royal Society of Chemistry
	Nitrile derivative functionalized graphene oxide membranes for efficient separation of strontium from aqueous waste; Vishwakarma R.K; Narayanam P.K; Sriram S.; Colloids and Surfaces A: Physicochemical and Engineering Aspects; (I.F:5.2); (2023) Vol.674; Art.131894; Doi:10.1016/j.colsurfa.2023.131894; ISSN:0927-7757; Elsevier B.V.
	(In Press) Numerical simulation of localization of a sub-assembly with failed fuel pins in the prototype fast breeder reactor; Bachchan A; Hazra P; Sundaram N; Kirtan S; Chaudhary N; Riyas A; Devan K.; Nuclear Engineering and Technology; (I.F:2.7); (2023); Doi:10.1016/j.net.2023.06.030; ISSN:1738-5733; Korean Nuclear Society
	Polyvinylidene Difluoride-SiO2-Silane Based Superhydrophobic Coatings on Carbon Steel with Enhanced Corrosion Resistance and Self-Cleaning Property; Vanithakumari S.C; Thinaharan C; Philip J.; Journal of Materials Engineering and Performance; (I.F:2.3); (2023) Vol.32(13); pp.6028-6041 Doi:10.1007/s11665-022-07530-9; ISSN:1059-9495; Springer
	Preparation and Soxhlet leaching studies of strontium incorporated sodium iron titanate by ICP-OES and NAA methods; Selvan B.R; Sriram S; Chand M; Suba M.A; Suneesh A.S; Murthy A.S.R; Balakrishnan S; Ramanathan N; Vijayalakshmi S; Jayaraman V.; Journal of Radioanalytical and Nuclear Chemistry; (I.F:1.6); (2023) Doi:10.1007/s10967-023-09016-x; ISSN:0236-5731; Springer Science and Business Media B.V.
	(Book Chap.) Raman spectroscopy for defects and crystalline disorder in oxide semiconductors; Sahu B.K; Beura R; Behera N; Joshi D.N; Pal A.K.; Defect-Induced Magnetism in Oxide Semiconductors; pp.367-393 Doi:10.1016/B978-0-323-90907-5.00005-1; ISSN:; Elsevier
	Realization of high performance PZN-PT single crystal based piezoelectric flexural mode hydrophone for underwater sensor applications; Manikandan C; Varadarajan E; Vijayakumar P; Ramesh R; Roy V; Sarguna R.M; Amaladass E.P; Ganesamoorthy S; Vinodkumar T.K; Unni M.N; Venkataraman C.S.N; Natarajan V; Babu S.M.; Materials Research Express; (I.F:2.3); (2023) Vol.10(6); Art.66303; Doi:10.1088/2053-1591/acdfbd; ISSN:2053-1591; Institute of Physics
	Risk assessment and numerical analysis of short-term accident scenarios in a nuclear fuel storage vault; Mishra V.K; Panda S.K; Sen B; Samantaray D.; Numerical Heat Transfer; Part A: Applications; (I.F:2); (2023); Doi:10.1080/10407782.2023.2230354; ISSN:1040-7782; Taylor and Francis Ltd.
	Room temperature excitonic emission in highly aligned ZnO nanostructures prepared by glancing angle Xe+ ion irradiation; Saravanan K; Sen S; Sharma C; Amirthapandian S; Ganesan K; Gupta M; Sundaravel B; Chandra Shekar NV; Journal of Luminescence; (I.F:3.6); (2023); Vol.263; Art.120059; Doi:10.1016/j.jlumin.2023.120059; ISSN: 0022-2313; Elsevier B.V.
	Self-healing in CdTe nanostructures: Insights into their structural stability and optical properties using first principles theory; Chavan K.T; Chandra S.; Journal of Physics and Chemistry of Solids; (I.F:4); (2023); Vol.181; Art.111524; Doi:10.1016/j.jpcs.2023.111524; ISSN:0022-3697; Elsevier Ltd
	Silicon carbide capped magnetite nanoparticles: Role of capping on high-temperature stability, magnetic properties, and water dispersibility; Muthukumaran T; Philip J.; Ceramics International; (I.F:5.2); (2023); Vol.49(17); pp.28376-28391 Doi:10.1016/j.ceramint.2023.06.093; ISSN:0272-8842; Elsevier Ltd
	Spatio-temporal evolution of sodium aerosol and temperature distribution during sodium pool fire in a confined environment; Kumar A; Pujala U; Hemanth Rao E; Venkat Reddy G; Subramanian V; Kumar Das S; Ponraju D; Venkatraman B.; Nuclear Engineering and Design; (I.F:1.7); (2023); Vol.411; Art.112424; Doi:10.1016/j.nucengdes.2023.112424; ISSN:0029-5493; Elsevier Ltd
	Steered discrete-time quantum walks for engineering of quantum states; Kadiri G.; Physical Review A; (I.F:2.9); (2023); Vol.108 (1); Art.12607; Doi:10.1103/PhysRevA.108.012607; ISSN:2469-9926; American Physical Society
	The relative effect of boron and nitrogen concentrations on microstructure and creep resistance of weld simulated heat-affected zones of modified 9Cr-1Mo steel; Rejeesh R; Biswal S; Mitra R; Chakrabarti D; Das C.R; Albert S.K.; Materials Science and Engineering: A; (I.F:6.4); (2023); Vol.881; Art.145417; Doi:10.1016/j.msea.2023.145417; ISSN:0921-5093; Elsevier Ltd

IGCAR Publication during June 2023 (Source: Scopus)

	A gelation facility for the preparation of ceramic microspheres Maji D; Ananthasivan K; Krishnan R.V; Balakrishnan S; Kothandaraman B; Jogeswararao G; Senapati A; Padmanabhan R; Kumar B.A; Balasubramonian S; Jayaraman V. AProgress in Nuclear Energy (I.F: 2.70) 2023 Vol.162 Art No. 104769 DOI: 10.1016/j.pnucene.2023.104769, Elsevier Ltd, ISSN: 1491970
	A study on the evolution of carbide phases in Nb-1Zr-0.1C alloy under the influence of neutron and Ne ion irradiation Goel L; Kumar N.N; Ali K; Sinha S.K; Vishwanadh B; Dasgupta A; Arya A; Tewari R. Journal of Alloys and Compounds (I.F: 6.20) 2023 Vol.960 Art No.170959 DOI: 10.1016/j.jallcom.2023.170959, Elsevier Ltd, ISSN: 9258388
	Acid-Resistant Luminescent Si/UiO-66-Amidoxime (AO) Nanostructures for Rapid and Efficient Recovery of U(VI): Experimental and Theoretical Studies Vaddanam V.S; Pamarthi A; Sengupta S; Sahoo M; Gupta S.K; Balija S; Gopakumar G; BrahmanandaRao C.V.S; Suresh A; Jha S.N; Nagarajan S. ACS Applied Nano Materials (I.F: 5.90) 2023 DOI: 10.1021/acsanm.3c00477, American Chemical Society, ISSN: 25740970
	An Enhanced Piecewise Linear Interface Construction Template Based on c0 Correction Maity R.K; Sundararajan T; Velusamy K. Lecture Notes in Mechanical Engineering (I.F: NA) 2023 PP. 151-156 DOI: 10.1007/978-981-19-6270-7_27, Springer Science and Business Media Deutschland GmbH, ISSN: 21954356
	An Experimental Investigation of Two-Phase Frictional Pressure Drop in Straight-Tube Steam Generator Used in SFR Pathak S.P; Velusamy K; Devan K; Suresh Kumar V.A. Nuclear Science and Engineering (I.F: 1.46) 2023 DOI: 10.1080/00295639.2023.2216127, Taylor and Francis Ltd., ISSN: 295639
	An Experimental Study on Two-Phase Flow Instability in Once-Through Steam Generator Used in SFR Pathak S.P; Velusamy K; Kumar V.A.S; Nashine B.K. Lecture Notes in Mechanical Engineering2023 pp. 457-462 DOI: 10.1007/978-981-19-6970-6_76, 10.1007/978-981-19-6970-6_76, ISSN: 21954356
	Antifouling mechanisms in and beyond nature: leverages in realization of bioinspired biomimetic antifouling coatings Murthy P.S; Nanchariah Y.V; Venkatnarayanan S; Das A; Krishna Mohan T.V Advances in Nanotechnology for Marine Antifouling2023 pp. 329-362 DOI: 10.1016/B978-0-323-91762-9.00013-7, Elsevier
	Bipartite entanglement distillation by unilateral and bilateral local filters using polarizing Mach-Zehnder interferometers Dhilipan P; Srinivasan K; Raghavan G. Journal of Applied Physics (I.F: 3.20) 2023 Vol.133(18) Art No. 184401 DOI: 10.1063/5.0153636, American Institute of Physics Inc., ISSN: 218979
	Contact angle measurement system with liquid sodium in inert atmosphere Faizal V.A; Murugesan N; Sukumaran V; Jena H; Remash C; Ganesan R; Jayaraman V. Review of Scientific Instruments (I.F: 1.60) 2023 Vol. 94(6) Art No. 65105 DOI: 10.1063/5.0151599, American Institute of Physics Inc., ISSN: 346748
	Corrosion behaviour of oxide film formed on carbon steel in high temperature alkaline water in the presence of zinc and magnesium ions Suresh S; Bera S; Palogi C; Sundaravel B; Jagadeesan P; Krishna Mohan TV Corrosion Engineering Science and Technology (I.F: 1.97) 2023 DOI: 10.1080/1478422X.2023.2212456, Taylor and Francis Ltd., ISSN: 1478422X
	Creep Performance and Microstructural Characterization of Electron-Beam Welded 316LN SS-Grade 91 Steel Dissimilar Joint Vanaja J; Dey H.C; Prasad Reddy G.V; Laha K; Vasudevan M. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (I.F: 2.80) 2023 DOI: 10.1007/s11661-023-07074-0, Springer, ISSN: 10735623
	Crystal plasticity finite element modelling on the influence of grain size and shape parameters on the tensile stiffness and yield strength Abraham S.T; Bhat S.S. Materials Science and Engineering: A (I.F: 6.40) 2023 Vol. 877 Art No. 145155 DOI: 10.1016/j.msea.2023.145155, Elsevier Ltd, ISSN: 9215093
	Design of a sensor for real-time measurement of high molarity(12M-16M) sodium hydroxide ShriVidhatri MM; Sivaramakrishna M; Chitrakkumar S. APSCON 2023 - IEEE Applied Sensing Conference, Symposium Proceedings2023 DOI: 10.1109/APSCON56343.2023.10101222, Institute of Electrical and Electronics Engineers Inc.
	Design of analog pressure transmitter (4-20 mA) for fast reactors ShriVidhatri M.M; Sivaramakrishna M; Chitrakkumar S. 2023 3rd International Conference on Advances in Electrical, Computing, Communication and Sustainable Technologies, ICAECT 2023 DOI: 10.1109/ICAECT57570.2023.10118254, Institute of Electrical and Electronics Engineers Inc.
	Determination of thermochemical properties of stainless steels type D-9 and T-91 using Knudsen Effusion Mass Spectrometry Trinadh V.V; Manikandan P; Bera S; Rao C.V.S.B; Narasimhan T.S.L. ThermochimicaActa (I.F: 3.50) 2023 Vol. 725 Art No. 179538 DOI: 10.1016/j.tca.2023.179538, Elsevier B.V., ISSN: 406031
	Development of a chelating ion exchange-based radionuclides removal method for the treatment of routine laboratory organic liquid waste Suneesh A.S; Rout A; Prathibha T; Selvan B.R; Suba M.A; Rao J.S.B; Kumar G.V.S.A; Ramanathan N. Journal of Radioanalytical and Nuclear Chemistry (I.F: 1.60) 2023 DOI: 10.1007/s10967-023-08927-z, Springer Science and Business Media B.V. ISSN: 2365731
	Effect of additive (Zr) and dopants (Pd&Sb) on the depth of migration of lighter lanthanides (Nd&Ce) from U-bearing metal alloys into T91 steel Janardhanan N; Maity U.K; Natarajan G; Prabhu E; Bahuguna A; Manoravi P; Joseph M; Ravindranath N.A; Sivaraman N. Journal of Nuclear Materials (I.F: 3.10) 2023 Vol.584 Art No.154562 DOI: 10.1016/j.jnucmat.2023.154562, Elsevier B.V., ISSN: 223115
	Effect of Dilution on High-Temperature and High-Vacuum Tribological Behaviour of Ni-Cr-B-Si Hardfaced Coating Sreevidya N; Rani R; Das C.R; Mathews T; Albert S.K; Vasudevan M; Ramaseshan R. Transactions of the Indian Institute of Metals (I.F: 1.60) 2023 DOI: 10.1007/s12666-023-02963-9, Springer, ISSN: 9722815
	Effect of Thermal Aging on Deformation and Fracture Properties of SS 304HCu Shanthi G; Nanibabu M; Krishnan S.A; Moitra A; Vasudevan M. Journal of Materials Engineering and Performance (I.F: 2.30) 2023, Vol.32 (10) pp.4575-4584 DOI: 10.1007/s11665-022-07408-w, Springer, ISSN: 10599495
	Effects of microstructure on radiolytic degradation of nuclear grade cationic resins: Gel versus macro-porous Mal D; Puspalata R; Amirthapandian S; Bera S; Mohan T.V.K. Radiation Physics and Chemistry (I.F: 2.90) 2023 Vol.211 Art No.111081 DOI: 10.1016/j.radphyschem.2023.111081, Elsevier Ltd, ISSN: 0969806X
	Enhanced Light Scattering Using a Two-Dimensional Quasicrystal-Decorated 3D-Printed Nature-Inspired Bio-photonic Architecture Kumbhakar P; Pramanik A; Mishra S.S; Tromer R; Biswas K; Dasgupta A; Galvao D.S; Tiwary C.S. Journal of Physical Chemistry C (I.F: 3.50) 2023 DOI: 10.1021/acs.jpcc.3c00513, American Chemical Society, ISSN: 19327447
	Epoxy Based Scintillators for Beta Radiation Detection Rajakrishna K; Dhanasekaran A; Yuvaraj N; Ajoy K.C; Jose M.T. IEEE Transactions on Nuclear Science (I.F: 1.80) 2023, DOI: 10.1109/TNS.2023.3281971 Institute of Electrical and Electronics Engineers Inc., ISSN: 189499
	Experimental study on influence of shielding gas pressure on the quality of pulsed laser welding of thin walled T91 steel clad tube with end plug Lavakumar R; Prabhu T.V; ParandhamaRaju B; Nanthakumar G; Rawat M. Materials Today: Proceedings2023 DOI: 10.1016/j.matpr.2023.04.361, Elsevier Ltd, ISSN: 22147853
	Facile fabrication of superhydrophobic steel surfaces with self-cleaning ability using nickel myristate/PDMS bilayer coating Vanithakumari S.C; Johnson C.C; Philip J. Surface and Coatings Technology (I.F: 5.40) 2023 Vol.467 Art No. 129712 DOI: 10.1016/j.surfcoat.2023.129712, Elsevier B.V., ISSN: 2578972
	High contrast corrosion mapping of dissimilar metal weld joints using alternating current scanning electrochemical microscopy: A case study Pal A; Krishna N.G; Shankar A.R; Philip J. Corrosion Science (I.F: 8.30) 2023 Vol.221 Art No. 111345 DOI: 10.1016/j.corsci.2023.111345, Elsevier Ltd, ISSN: 0010938X
	Improvement of Weld Bead Characteristics in Gas Metal are welding of SA515 Carbon Steel by Applying Alternating Shielding Gas flow Technique Mariappan M; Parthasarathi N.L; Ravindran R; Lenin K; Palanisamy A. Transactions of Famena 2023 Vol.47(1) pp. 67-86, DOI: 10.21278/TOF.471032821, University of Zagreb Faculty of Mechanical Engineering and Naval Architecture, ISSN: 13331124
	Investigating algebraic topological method for solving 3D Laplace equation in electrostatic boundary value problems Arun A.D; Thirunavukkarasu S; Chandra S; Rajiniganth M.P; Malathi N; Sivaramakrishna M. Computer Physics Communications (I.F: 4.72) 2023 Vol.289 Art No. 108759 DOI: 10.1016/j.cpc.2023.108759, Elsevier B.V., ISSN: 104655
	Investigation of tris(2-methylbutyl) phosphate for U/Th separation from U-Th and U-Th-REE solutions by cross current mode Subashree K; Suresh A; Sivaraman N. Separation Science and Technology (I.F: 2.80) 2023 DOI: 10.1080/01496395.2023.2212855, Taylor and Francis Ltd., ISSN: 18938
	Ion Irradiation-Induced Interface Mixing and the Charge Trap Profiles Investigated by In Situ Electrical Measurements Manikanthababu N; Joishi C; Biswas J; Prajna K; Asokan K;Vas JV; Medwal R; Meena RC;Lodha S; Singh R. IEEE Transactions on Electron Devices (I.F: 3.10) 2023 pp.1-7 DOI: 10.1109/TED.2023.3271281, Institute of Electrical and Electronics Engineers Inc., ISSN: 189383
	Machine learning assisted prediction of creep data of India specific reduced activation ferritic martensitic steel Narula P; Kumar P.A; Vanaja J; Reddy G.V.P; Rao G.V.S.N. Materials Today Communications (I.F: 3.80) 2023 Vol.35 Art No. 106165 DOI: 10.1016/j.mtcomm.2023.106165, Elsevier Ltd, ISSN: 23524928
	Manifestation of Differential Thermal Expansion in Teflon Guide Bushes/Pads Patri S; Kaushal N; Sreedhar B.K. Journal of Failure Analysis and Prevention (I.F: 1.20) 2023 pp.1242-1242 DOI: 10.1007/s11668-023-01676-x, Springer, 15477029
	Microstructural Characterization of Novel ZrO2 Dispersion-Strengthened 9Cr Steel by Spark Plasma Sintering Raghavendra K.G; Dasgupta A; Karthiselva N.S; Jayasankar K; Bakshi S.R. Journal of Materials Engineering and Performance (I.F: 2.30) 2023 DOI: 10.1007/s11665-023-08244-2, Springer, ISSN: 10599495
	Nanoscopy and Nanospectroscopy Dhara S; Jariwala D; Das S. Nanoscopy and Nanospectroscopy 2023 pp.1-268 DOI: 10.1201/9781003248323, CRC Press
	Novel instrumentation for high-impedance electromotive force (EMF) measurements Keshari A.K; Rao J.P; Ganesan R. Instrumentation Science and Technology (I.F: 1.50) 2023 DOI: 10.1080/10739149.2023.2213309, Taylor and Francis Ltd., ISSN: 10739149
	Numerical Analysis of Short-term Blackout Scenario in a Nuclear Fuel Storage Vault Mishra V.K; Panda S.K; Sen B; Maiya M.P; Rao B.P.C. Lecture Notes in Mechanical Engineering 2023 pp.451-455, DOI: 10.1007/978-981-19-6970-6_75, Springer Science and Business Media Deutschland GmbH, ISSN: 21954356
	Numerical Simulation of Subcooled Flow Boiling in a Vertical Annulus Channel Under Near Atmospheric Pressure Conditions Tom S; MangarjunaRao P; Venkatraman B; Raghupathy S. Nuclear Science and Engineering (I.F: 1.46) 2023 Vol. 197(6) pp.1038-1070 DOI: 10.1080/00295639.2022.2133948, Taylor and Francis Ltd., ISSN: 295639
	Numerical studies on liquid sodium flow boiling in a 7-pin hexagonal subassembly towards flow rundown scenario in SFR Tom S; MangarjunaRao P; Venkatraman B; Raghupathy S. Applied Thermal Engineering (I.F: 6.40) 2023 Vol. 230 Art No. 120637 DOI: 10.1016/j.applthermaleng.2023.120637, Elsevier Ltd, ISSN: 13594311
	On the modification of wire wrapping process for fast Breeder reactor fuel Pins: Replacing hydraulic crimping with resistance spot welding Kumar A; Kulshrestha A; Aher S; Kolhatkar A.V; Jayaraj V.V; Karthik V; Sathe D.B; Bhatt R.B. Nuclear Engineering and Design (I.F: 1.70) 2023 Vol. 411 Art No. 112441 DOI: 10.1016/j.nucengdes.2023.112441, Elsevier Ltd, ISSN: 295493
	Optical Nanoscopy Madapu K.K. Nanoscopy and Nanospectroscopy 2023 pp.75-96, DOI: 10.1201/9781003248323-4, CRC Press
	Photoluminescence studies of Ln3+ (Ln = Eu, Tb) doped Y(benzoate)3 complexes Maji S; Kumar S; Sen S; Sundararajan K. Journal of Luminescence (I.F: 3.60) 2023 Vol. 262 Art No. 119950 DOI: 10.1016/j.jlumin.2023.119950, Elsevier B.V., ISSN: 222313
	Physicochemical properties and AC magnetic field induced heating properties of solvothermally prepared thiospinel: Fe3S4 (greigite) nanoparticles Aarathy A.R; Lahiri B.B; Pillai S.S; Philip J. PhysicaScripta (I.F: 2.90) 2023 Vol. 98(6) Art No. 65933, DOI: 10.1088/1402-4896/acd0e0, Institute of Physics, ISSN: 318949
	Piezoelectric response of InN nanostructures grown on c-Al2O3 and Si substrates: Role of oxygen incorporation in improved piezoresponse Madapu K.K; Mangamma G; Polaki S.R; Dhara S. Materials Research Bulletin (I.F: 5.40) 2023 Vol. 166 Art No. 112367 DOI: 10.1016/j.materresbull.2023.112367, Elsevier Ltd, ISSN: 255408
	Plasmonic and Optical Confinement Sahu B.K; Sahoo P.K; Dhara S. Nanoscopy and Nanospectroscopy 2023 pp.39-50, DOI: 10.1201/9781003248323-2, CRC Press
	Polyaniline modified waste-derived graphene/sulfurnanocomposite cathode for lithium-sulfur batteries Ponmani P; Bahadur J; Tewari C; Gupta D.K; Kalita U; Jegadeesan P; Ravindran T.R; Alex A; Das A; Sahoo N; Sivanantham M; Choudhury S. Journal of Polymer Science (I.F: 3.40) 2023, DOI: 10.1002/pol.20220709, John Wiley and Sons Inc, ISSN: 26424150
	Process parameter optimization of hot-wire TIG welding of 10 mm thick type 316LN stainless steel plates Neelamegam C; Meenakshisundaram R; Muthukumaran V. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (I.F: 2.00) 2023, DOI: 10.1177/09544062231175779, SAGE Publications Ltd, ISSN: 9544062
	Reverse transition of ball milling induced m-Y2O3 nano-crystallites during in-situ annealing VaishnaviKrupa B.R; Ghosh C; Sinha S.K; Dasgupta A. Ceramics International (I.F: 5.20) 2023 Vol. 49(14) pp.23522-23530 DOI: 10.1016/j.ceramint.2023.04.185, Elsevier Ltd, ISSN: 2728842
	Scale-Invariant Geometries Arising from the Interaction Between a 9%Cr Steel and Molten Nitrate Salt Aashranth B; Davinci M.A; Samantaray D. JOM(I.F: 2.60) 2023 DOI: 10.1007/s11837-023-05844-0, Springer, ISSN: 10474838
	Simulation Experiments on Sodium Leak Through Pipe Cracks Avinash C.S.S.S; HemanthRao E; NaniBabu M; Malarvizhi B; Das S.K; Ponraju D; Venkatraman B. Lecture Notes in Mechanical Engineering 2023 pp.421-426 DOI: 10.1007/978-981-19-6970-6_70, Springer Science and Business Media Deutschland GmbH, ISSN: 21954356
	Simulation of Single-Phase Series Coupled Natural Circulation Loops using the Numerical Model Developed Adinarayana K.N.V; Ali S.M; Rao P.M. Lecture Notes in Mechanical Engineering 2023 pp.257-262 DOI: 10.1007/978-981-19-6270-7_45, Springer Science and Business Media Deutschland GmbH, ISSN: 21954356
	Solubility of tris(2-methylbutyl) phosphate in supercritical carbon dioxide and its application for the recovery of uranium from U-Zr and U-Th aqueous solutions Subashree K; Pitchaiah K.C; Suresh A; Sivaraman N. Journal of Supercritical Fluids (I.F: 3.90) 2023 Vol. 199 Art No. 105973 DOI: 10.1016/j.supflu.2023.105973, Elsevier B.V., ISSN: 8968446
	Spatiotemporal Evaluation of Bubble Characteristics in Sodium Using Real-Time X-Ray Imaging Acharya A.K; Rao E.H; Menaka M; Das S.K; Ponraju D; Venkatraman B. Nuclear Technology (I.F: 1.67) 2023 DOI: 10.1080/00295450.2023.2199079, Taylor and Francis Ltd., ISSN: 295450
	Spectrophotometric determination of di-butyl phosphate in PUREX solvent using peroxodisulfate as oxidizing agent Aneesh T; Devi S.S; Chandran N; Usha S; Nair B.S; Mahildoss D.J; Dhamodharan K; Ananthasivan K. Journal of Radioanalytical and Nuclear Chemistry (I.F: 1.60) 2023 DOI: 10.1007/s10967-023-08941-1, Springer Science and Business Media B.V. ISSN: 2365731
	Study of thermocouple degradation through accelerated aging under corrosive environment Kumar V.D; Bhattacharyya A; Behera R.P; Prabakar K. Proceedings of the 10th International Conference on Signal Processing and Integrated Networks, SPIN 2023 pp.46-51 DOI: 10.1109/SPIN57001.2023.10116553, Institute of Electrical and Electronics Engineers Inc.
	The Tribocorrosion Behaviour and its Mechanisms of Type 304L Stainless Steel in Nitric Acid Media Priya R; Ningshen S. Journal of Materials Engineering and Performance (I.F: 2.30) 2023 Vol. 32(12) pp.5261-5272 DOI: 10.1007/s11665-022-07511-y, Springer, ISSN: 10599495
	Theory of Light Scattering and Applications Ravindran T.R; Dhara S. Nanoscopy and Nanospectroscopy 2023 pp.1-38 DOI: 10.1201/9781003248323-1, CRC Press
	Unique magnetic graphene oxide with enhanced carboxylate functional groups for uranium separation by solid phase extraction Suneesh A.S; Manojkumar P.A; Robert Selvan B; Ghosh C; Mythili R; Chandra S; Ramanathan N. Materials Science and Engineering: B (I.F: 3.60) 2023 Vol. 295 Art No. 116609 DOI: 10.1016/j.mseb.2023.116609, Elsevier Ltd, ISSN: 9215107
	Vertical graphenenanosheets as interface current-collector for enhanced charge-storage kinetics of bimetallic MOF nano-rods and asymmetric solid-state supercapacitors Sahoo G; Jeong H.S; Polaki S.R; Jeong S.M. Journal of Energy Storage (I.F: 9.40) 2023 Vo. 68 Art No. 107824 DOI: 10.1016/j.est.2023.107824, Elsevier Ltd, ISSN: 2352152X

IGCAR Publication during May 2023 (Source: Scopus)

	Spatiotemporal Evaluation of Bubble Characteristics in Sodium Using Real-Time X-Ray Imaging Acharya A.K; Rao E.H; Menaka M; Das S.K; Ponraju D; Venkatraman B; Nuclear Technology (I.F:1.667) 2023 DOI: 10.1080/00295450.2023.2199079, Taylor and Francis Ltd, ISSN: 295450
	Bipartite entanglement distillation by unilateral and bilateral local filters using polarizing Mach-Zehnder interferometers Dhilipan P; Srinivasan K; Raghavan G; Journal of Applied Physics (I.F:2.877) 2023 Vol.138 (18) Art No. 184401 Doi: 10.1063/5.0153636, American Institute of Physics Inc., ISSN: 218979
	Improved piezoelectric and electric field-induced strain properties in Eu3+ modified 0.42PMN–0.26PIN–0.32PT ceramics Gowthami S; Anandha Babu G; Manikandan C; Varadarajan E; Sarguna R.M; Applied Physics A: Materials Science and Processing (I.F:2.983) 2023 Vol.129 (4) Art No. 239 Doi: 10.1007/s00339-023-06519-y, Springer Science and Business Media Deutschland GmbH ISSN: 9478396
	The influence of N-π pnicogen bonding in π-stacked parallel displaced geometry of nitrobenzene dimers: Evidence using matrix isolation infrared spectroscopy and ab initio computations Chandra S; Mahapatra N; Ramanathan N; Sundararajan K; Journal of Molecular Structure (I.F:3.841) 2023 Vol. 1279 Art No. 135022 Doi: 10.1016/j.molstruc.2023.135022, Elsevier B.V. , ISSN: 222860
	Raman studies in Al+ implanted semi insulating 6H-SiC Kamalakkannan K; Rajaraman R; Sundaravel B; Amarendra G; Sivaji K; Materials Letters (I.F:3.574) 2023 Vol.344 Art No. 134404 Doi: 10.1016/j.matlet.2023.134404, Elsevier B.V., ISSN: 0167577X
	Physicochemical properties and AC magnetic field induced heating properties of solvothermally prepared thiospinel: Fe3S4 (greigite) nanoparticles Aarathy A.R; Lahiri B.B; Pillai S.S; Philip J; Physica Scripta (I.F:3.081) 2023 Vol.98 (6) Art No. 65933, Doi: 10.1088/1402-4896/acd0e0, Institute of Physics , ISSN: 318949
	Computed Torque Control Method for Two-Axis Planar Serial Robotic Arm Perumalsamy G. Kumar D; Jose J; Joseph Winston S; Murugan S; IETE Journal of Research (I.F:1.877) 2023 Vol.69 (3) pp.1437-1445 Doi: 10.1080/03772063.2020.1869595, Taylor and Francis Ltd., ISSN: 3772063
	A simple fluorescent sensor for the meticulous recognition of Cu2+ ion and its functioning in logic gate and keypad lock Kumar G.G.V; Bhaskar R; Harathi J; Borda R.F.C; Hussain S; Sundaramoorthy A; Journal of Photochemistry and Photobiology A: Chemistry (I.F:5.141) 2023 Vol. 441 Art No. 114750 Doi: 10.1016/j.jphotochem.2023.114750, Elsevier B.V., ISSN: 10106030
	Numerical studies on liquid sodium flow boiling in a 7-pin hexagonal subassembly towards flow rundown scenario in SFR Tom S; Mangarjuna Rao P; Venkatraman B; Raghupathy S; Applied Thermal Engineering (I.F:6.465) 2023 Vol. 230 Art No. 120637 Doi: 1 0.1016/j.applthermaleng.2023.120637, Elsevier Ltd, ISSN: 13594311
	The complexation of lanthanides by glycolamide extractants: Evidences from electronic spectroscopy and DFT calculations Prathibha T; Kumar S; Chandra S; Maji S; Ramanathan N; Inorganica Chimica Acta (I.F:3.118) 2023 Vol. 548 Art No. 121396 Doi: 10.1016/j.ica.2023.121396, Elsevier B.V., ISSN: 201693
	Investigating algebraic topological method for solving 3D Laplace equation in electrostatic boundary value problems Arun A.D; Thirunavukkarasu S; Chandra S; Rajiniganth M.P; Malathi N; Sivaramakrishna M; Computer Physics Communications (I.F:4.717) 2023 Vol. 289 Art No. 108759 Doi: 10.1016/j.cpc.2023.108759, Elsevier B.V., ISSN: 104655
	Solubility of tris(2-methylbutyl) phosphate in supercritical carbon dioxide and its application for the recovery of uranium from U-Zr and U-Th aqueous solutions Subashree K; Pitchaiah K.C; Suresh A; Sivaraman N; Journal of Supercritical Fluids (I.F:4.514) 2023 Vol. 199 Art No. 105973 Doi: 10.1016/j.supflu.2023.105973, Elsevier B.V., ISSN: 8968446
	A Fan-Controlled Sodium-to-Air Heat Exchanger Configuration for Failsafe Decay Heat Removal in Sodium-Cooled Fast Reactors Arul A.J; Patel P.R; Shukla D.K; Nuclear Technology (I.F:1.667), 2023, pp.1024-1039 Doi: 10.1080/00295450.2023.2175584, Taylor and Francis Ltd., ISSN: 295450
	Development of a chelating ion exchange-based radionuclides removal method for the treatment of routine laboratory organic liquid waste Suneesh A.S; Rout A; Prathibha T; Selvan B.R; Suba M.A; Rao J.S.B; Kumar G.V.S.A; Ramanathan N; Journal of Radioanalytical and Nuclear Chemistry (I.F:1.754) 2023 Doi: 10.1007/s10967-023-08927-z, Springer Science and Business Media B.V., ISSN: 2365731
	Diglycolamic acid coated cation exchange adsorbent for uranium removal by extraction chromatography Selvan B.R; Suneesh A.S; Ramanathan N; Journal of Radioanalytical and Nuclear Chemistry (I.F:1.754) 2023 Vol. 332(6) pp. 1775- 1786 Doi: 10.1007/s10967-023-08869-6, Springer Science and Business Media B.V., ISSN: 2365731
	Novel instrumentation for high-impedance electromotive force (EMF) measurements Keshari A.K; Rao J.P; Ganesan R; Instrumentation Science and Technology (I.F:1.509) 2023 Doi: 10.1080/10739149.2023.2213309, Taylor and Francis Ltd., ISSN: 10739149
	Anisotropy Corrected FMC/TFM Based Phased Array Ultrasonic Imaging in an Austenitic Buttering Layer Ponseenivasan S; Kumar A.; Rajkumar K.V; Applied Sciences (Switzerland) (I.F:2.838) 2023 Vol.13(8) Art No. 5195 Doi: 10.3390/app13085195, MDPI, ISSN: 20763417
	Machine learning assisted prediction of creep data of India specific reduced activation ferritic martensitic steel Narula P; Kumar P.A; Vanaja J; Reddy G.V.P; Rao G.V.S.N; Materials Today Communications (I.F:3.662) 2023 Vol. 35 Art No. 106165 Doi: 10.1016/j.mtcomm.2023.106165, Elsevier Ltd, ISSN: 23524928
	γ-Resistant Microporous CAU-1 MOF for Selective Remediation of Thorium Gumber N; Pai R.V; Bahadur J; Sengupta S; Das D; Goutam U.K; ACS Omega (I.F:4.132) 2023 Vol. 8(13) pp. 12268-12282 Doi: 10.1021/acsomega.2c08274, American Chemical Society, ISSN: 24701343
	Study on the microstructure and mechanical properties of hybrid laser + MIG welded joints of 316LN stainless steel Pavan A.R; Arivazhagan B; Vasudevan M; Prasanthi T; Sudha C; Optics and Laser Technology (I.F:4.939) 2023 Vol. 163 Art No. 109410 Doi: 10.1016/j.optlastec.2023.109410, Elsevier Ltd, ISSN: 303992
	Magnetic and Isothermal Magnetic Entropy Change Behavior of EuS Sathyanarayana A.T; Amaladass E.P; Gangopadhyay P; Mani A; Journal of Superconductivity and Novel Magnetism (I.F:1.487) 2023, 6 (4), pp.1-8 Doi: 10.1007/s10948-023-06561-0, Springer, ISSN: 15571939
	Nitric Acid Corrosion of As-Received and Autoclaved Zircaloy-4 in All Zr-4 Nitric Acid Test Facility Shankar A.R; Sole R; Krishna D.N.G; Philip J; Journal of Materials Engineering and Performance (I.F:2.036) 2023 Doi: 10.1007/s11665-023-07945-y, Springer, ISSN: 10599495
	Creep Performance and Microstructural Characterization of Electron-Beam Welded 316LN SS-Grade 91 Steel Dissimilar Joint Vanaja J; Dey H.C; Prasad Reddy G.V; Laha K; Vasudevan M; Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (I.F:2.726) Doi: 10.1007/s11661-023-07074-0, Springer, ISSN: 10735623
	Quantification of Shear Strain Development in the Through-Thickness Direction During Sliding Wear Neog S.P; Nair A.G; Das Bakshi S; Dasgupta A; Das S; Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (I.F:2.726) 2023 Vol. 54(1) pp. 11-15 Doi: 10.1007/s11661-022-06901-0, Springer, ISSN: 10735623
	Corrosion behaviour of oxide film formed on carbon steel in high temperature alkaline water in the presence of zinc and magnesium ions Suresh S; Bera S; Palogi C; Sundaravel, B; Jagadeesan, P; Krishnamohan, T.V; Corrosion Engineering Science and Technology (I.F:1.971) 2023 Doi: 10.1080/1478422X.2023.2212456, Taylor and Francis Ltd., ISSN: 1478422X
	Effect of addition of Nb on phase stability of equiatomic CrFeMoV alloy Saikumaran A; Mythili R; Materials Chemistry and Physics (I.F:4.778) 2023 Vol. 294 Art No. 127013 Doi: 10.1016/j.matchemphys.2022.127013, Elsevier Ltd, ISSN: 2540584
	Improvements in the Metallography of Ferritic–Martensitic Steels Through a Color Etching Procedure Mandal M; Aashranth B; Samantaray D; Vasudevan M; Metallography, Microstructure, and Analysis, 2023 Vol.12(1) pp.49-61 Doi: 10.1007/s13632-022-00916-0, Springer, ISSN: 21929262
	Corrosion behaviour of P-91 steel and type 316 LN stainless steel with and without a ceramic coating in the lead with oxygen at 550°C Priya R; Ningshen S; Journal of Nuclear Materials (I.F:3.555) 2023 Vol. 574 Art No. 154181 Doi: 10.1016/j.jnucmat.2022.154181, Elsevier B.V., ISSN: 223115
	Scale-Invariant Geometries Arising from the Interaction Between a 9%Cr Steel and Molten Nitrate Salt Aashranth B; Davinci M.A; Samantaray D; JOM (IF: 2.973) Doi: 10.1007/s11837-023-05844-0, Springer, ISSN: 10474838
	Gold nanoparticle decorated vertical graphene nanosheets composite/hybrid for acetone sensing at room temperature Geramilla M; Muthukumaravel C; Karunakaran U; Sairam T.N; Materials Science and Engineering B: Solid-State Materials for Advanced Technology (I.F:3.407) 2023 Vol. 288 Art No. 116211 Doi: 10.1016/j.mseb.2022.116211, Elsevier Ltd, ISSN: 9215107
	Reverse transition of ball milling induced m-Y2O3 nano-crystallites during in-situ annealing Vaishnavi Krupa B.R; Ghosh C; Sinha S.K; Dasgupta A; Ceramics International (I.F:5.532), Vol.49 (14), 2023, pp. 23522-23530 Doi: 10.1016/j.ceramint.2023.04.185, Elsevier Ltd, ISSN: 2728842
	Two-Dimensional Multicomponent Quasicrystal as Bifunctional Electrocatalysts for Alkaline Oxygen and Hydrogen Evolution Reactions Mishra S.S; Kumbhakar P; Nellaiappan S; Katiyar N..; Tromer R; Woellner C.F; Galvao D.S; Tiwary C.S; Ghosh C; Dasgupta A; Biswas K; EnergyTechnology (I.F:4.149) 2023 Vol. 11(2) Art No.2200860 Doi: 10.1002/ente.202200860, John Wiley and Sons Inc, ISSN: 21944288
	Numerical simulation of operational transients in sodium-cooled fast reactors Vikram G; Natesan K; Rajendrakumar M; Nuclear Engineering and Design (I.F:1.90) 2023 Vol. 402 Art No. 112116 Doi: 10.1016/j.nucengdes.2022.112116, Elsevier Ltd, ISSN: 295493
	RGO nanosheet wrapped β-phase NiCu2S nanorods for advanced supercapacitor applications Kandhasamy N; Preethi L.K; Mani D; Walczak L; Mathews T; Venkatachalam R; Environmental Science and Pollution Research (I.F:5.190) 2023 Vol. 30(7) pp. 18546-18562 Doi: 10.1007/s11356-022-23359-0, Springer Science and Business Media Deutschland GmbH, ISSN: 9441344
	Microstructural Characterization of Novel ZrO2 Dispersion-Strengthened 9Cr Steel by Spark Plasma Sintering Raghavendra K.G; Dasgupta A; Karthiselva N.S; Jayasankar K; Bakshi S.R; Journal of Materials Engineering and Performance (I.F:2.036) 2023 Doi: 10.1007/s11665-023-08244-2, Springer, ISSN: 10599495
	Unravelling the microstructure – indentation creep resistance relationships for friction stir welded modified 9Cr-1Mo steel and LN-type 316 stainless-steel dissimilar joints Venkata krishna A; Lakshminarayanan A.K; Vasantharaja P; Vasudevan M; Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, (IF:2.663) 2023 Doi: 10.1177/14644207221148658, SAGE Publications Ltd, ISSN: 14644207
	Type IV Damage Evolution during Creep of 316LN SS-P91 Steel Dissimilar Weld Joint Vijayanand V.D; Awale D.D; Ballal A.R; Thawre M.M; Prasad Reddy G.V; Journal of Materials Engineering and Performance (I.F:2.036) 2023 Doi: 10.1007/s11665-023-08189-6, Springer, ISSN: 10599495
	An Experimental Study on Two-Phase Flow Instability in Once-Through Steam Generator Used in SFR Pathak S.P.; Velusamy K.; Kumar V.A.S.; Nashine B.K. Lecture Notes in Mechanical Engineering, 2023 pp. 457-462 Doi: 10.1007/978-981-19-6970-6_76, Springer Science and Business Media Deutschland GmbH, ISSN: 21954356
	(Book Chapter) Optical Nanoscopy Madapu K.K. Nanoscopy and Nanospectroscopy, 2023 pp. 75-96 Doi: 10.1201/9781003248323-4, CRC Press
	(Book Chapter) Nanoscopy and Nanospectroscopy Dhara S.; Jariwala D.; Das S. Nanoscopy and Nanospectroscopy, 2023 pp. 1-268 Doi: 10.1201/9781003248323, CRC Press
	Anomalies of Brillouin Light Scattering in Selected Perovskite Relaxor Ferroelectric Crystals Sivasubramanian V.; Ganesamoorthy S.; Kojima S. Materials (I.F:3.748) 2023 Vol. 16(2) Art No. 605 Doi: 10.3390/ma16020605, MDPI, ISSN: 19961944
	Simulation Experiments on Sodium Leak Through Pipe Cracks Avinash C.S.S.S.; Hemanth Rao E.; Nani Babu M.; Malarvizhi B.; Das S.K.; Ponraju D.; Venkatraman B. Lecture Note in Mechanical Engineering, 2023, pp.421-426, Doi:10.1007/978-981-19-6970-6_70, Springer Science & Business Media Deutschland GmbH, ISSN: 21954356
	(Book Chapter) Theory of Light Scattering and Applications Ravindran T.R.; Dhara S. Nanoscopy and Nanospectroscopy, 2023 pp.1-38, Doi: 10.1201/9781003248323-1, CRC Press
	Numerical Analysis of Short-term Blackout Scenario in a Nuclear Fuel Storage Vault Mishra V.K.; Panda S.K.; Sen B.; Maiya M.P.; Rao B.P.C. Lecture Notes in Mechanical Engineering, 2023 pp. 451-455 Doi: 10.1007/978-981-19-6970-6_75, Springer Science and Business Media Deutschland GmbH, ISSN: 21954356
	(Book Chapter) Plasmonic and Optical Confinement Sahu B.K.; Sahoo P.K.; Dhara S. Nanoscopy and Nanospectroscopy, 2023, pp. 39-50 Doi: 10.1201/9781003248323-2, CRC Press
	Design of a sensor for real-time measurement of high molarity(12M-16M) sodium hydroxide Vidhatri, M.M.; Sivaramakrishna M.; Chitrakkumar S. APSCON 2023 - IEEE Applied Sensing Conference, Symposium Proceedings Doi: 10.1109/APSCON56343.2023.10101222, Institute of Electrical and Electronics Engineers Inc.,
	Magnetic nanofluids (Ferrofluids): Recent advances, applications, challenges, and future directions Philip J. Advances in Colloid and Interface Science (I.F:15.19) 2023, Vol. 311 Art No. 102810 Doi: 10.1016/j.cis.2022.102810, Elsevier B.V., ISSN: 18686

IGCAR Publication during April 2023 (Source: Scopus)

	An inherently fault tolerant control of sodium cooled fast reactors and its stability analysis using particle swarm optimization Muthuraj T; Arul J; Surjagade P.V; Vajpayee V; Becerra V; Deng J. Progress in Nuclear Energy (I.F:2.461) (2023)Vol: 160, Art. No.104676 DOI:1016/j.pnucene.2023.104676,Elsevier, ISSN: 1491970
	Analysis of continuous casting system for casting U-6%wt Zr slug Rawat M; Lavakumar R;Prabhu T.V; Samantaray D. Materials Today: Proceedings, (2023) DOI:10.1016/j.matpr.2023.02.452,Elsevier, ISSN: 22147853
	Comparison of Cyclic Irradiation Behavior of Tri-Butyl Phosphate / Tri-Iso-Amyl Phosphate- Dodecane System in Nitric Acid Medium Mishra S; Desigan N; Venkatesan K.A; Ananthasivan K. Solvent Extraction and Ion Exchange (I.F:3.695) (2023) DOI: 1080/07366299.2023.2193592,Taylor and Francis, ISSN:7366299
	Computed Torque Control Method for Two-Axis Planar Serial Robotic Arm Perumalsamy G; Kumar D; Jose J; Joseph Winston S; Murugan S. IETE Journal of Research (I.F:1.877); (2023) Vol.69 (3) pp.1437-1445 DOI: 1080/03772063.2020.1869595,Taylor and Francis , ISSN: 3772063
	Coolant leak rate through fatigue cracked pipe bend: An experimental and design standard based investigation Kumar R.S; Rao B.N; Velusamy K; Raghupathy S. International Journal of Pressure Vessels and Piping (I.F:2.56) (2023) Vol.204, Art.No. 104953, DOI:1016/j.ijpvp.2023.104953, Elsevier, ISSN: 3080161
	Creep deformation behaviour of thermomechanically treated India specific reduced activation ferritic martensitic steel Kumar P.A;Vanaja J; Reddy G.V.P; Rao G.V.S.N. Journal of Nuclear Materials (I.F:3.555) (2023) Vol.581 ,Art.No. 154441, DOI:1016/j.jnucmat.2023, Elsevier B.V, ISSN: 223115
	Development of a three-stage, cross-current air sparged mixer-settler for the purification of degraded PUREX solvent Anand P V; Mishra S; Patra C; Gnanasoundari J; Sinha P.K; Mishra A.K; Rajeev R; Desigan N; Velavendan P; Venkatesan K.A; Ananthasivan K. Separation Science and Technology (Philadelphia) (I.F:2.799); (2023) Vol.58(8), pp.1415-1432 DOI:1080/01496395.2023.2189542,Taylor and Francis ,ISSN: 1496395
	Diglycolamic acid coated cation exchange adsorbent for uranium removal by extraction chromatography Selvan B.R; Suneesh A.S; Ramanathan N. Journal of Radioanalytical and Nuclear Chemistry (I.F:1.754) (2023) DOI:1007/s10967-023-08869-6,Springer Science and Business Media, ISSN: 2365731
	Effect of temperature and pressure on the reduction of U(VI) to U(IV) by hydrogen over Pt/SiO2: Reaction kinetics and modeling Reddy S.R; Ayyappa S.V.N; Mishra S; Sreepriya T; Desigan N; Venkatesan K.A; Sivaraman N; Ananthasivan K. Chemical Engineering Research and Design (I.F:4.119) (2023) Vol.193, pp.613-625 DOI:1016/j.cherd.2023.03.053,Institution of Chemical Engineers, ISSN: 2638762
	Effect of thermal expansion on the high temperature wear resistance of Ni-20%Cr detonation spray coating on IN718 substrate Purushotham N; Parthasarathi N.L; Babu P.S; Sivakumar G; Rajasekaran B. Surface and Coatings Technology (I.F:4.865) (2023) Vol.462, Art. No.129490, DOI:1016/j.surfcoat.2023.129490, Elsevier B.V, ISSN: 2578972
	Efficient tunability of size and optical properties of reduced graphene oxide-ZnO composite nanocrystallites on solid substrates Narayanam P.K. Colloids and Surfaces A: Physicochemical and Engineering Aspects (I.F:5.518) (2023) Vol.665, Art.No.131229, DOI:1016/j.colsurfa.2023.131229, Elsevier B.V, ISSN: 9277757
	Electrospunsuperparamagnetic fibrous composite nanofiber films for enhanced oil spill recovery: Effect of capping and magnetic nanoparticle loading on oil sorption efficiency Anushree C; Rahim F.A; Vanithakumari S.C; Thinaharan C; Philip J. Composites Part A: Applied Science and Manufacturing (I.F:9.463) (2023) Vol.171 Art. No.107591, DOI:1016/j.compositesa.2023.107591, Elsevier, ISSN: 1359835X
	Frame-level global context modeling for detection and localization of abnormality Sharma M.K; Kumar V; Sheet D; Biswas P.K. Multimedia Tools and Applications (I.F:2.577) (2023) DOI:1007/s11042-023-14575-y, Springer, ISSN: 13807501
	Growth of Cd1-xMnxTe crystals by vertical Bridgman method and analysis of composition dependence on the bandgap Rajan M; Paulraj R; Palanimuthu V; Ganesan K; Roy V; Amaladass E.P; Sarguna R.M; Ganesamoorthy S; Perumalsamy R. Materials Science in Semiconductor Processing (I.F:4.644) (2023) Vol.162 Art.No.107484 DOI:1016/j.mssp.2023.107484,Elsevier , ISSN: 13698001
	γ-Resistant Microporous CAU-1 MOF for Selective Remediation of Thorium Gumber N; Pai R.V; Bahadur J; Sengupta S; Das D; Goutam U.K. ACS Omega (I.F:4.132); (2023)Vol.8(13) pp.12268-12282 DOI:1021/acsomega.2c08274,American Chemical Society, ISSN: 24701343
	Insights into the surface chemistry induced photoreactivity of Fe-doped SnO2 in dye degradation Pan S; Bera S; Sen S; Das A. Inorganic Chemistry Communications (I.F:3.428) (2023) Vol.152, Art.No. 110672, DOI:1016/j.inoche.2023.110672, Elsevier B.V, ISSN:13877003
	Investigation of Fuel Melt and Grid Plate Interaction Moments After CDA in FBRs Dangi J.S; Vikram G; Natesan K. Lecture Notes in Mechanical Engineering, (2023) pp.349-354 DOI:1007/978-981-19-7055-9_59,Springer Science and Business Media, ISSN: 21954356
	Large amplitude oscillatory shear studies on dense PNIPAM microgel colloidal glasses Saisavadas M.V;Dhara S; Joshi R.G; Tata B.V.R. Colloid and Polymer Science (I.F:2.434) (2023) DOI:1007/s00396-023-05096-z,Springer Science and Business Media, ISSN: 0303402X
	Magnetoelastic coupling with inverse magnetocaloric effect observed in Sr2YRuO6 Saha P; Nithya R; Sathyanarayana A.T; Das A; Vinod K; Karmakar S; Rawat R. Journal of Magnetism and Magnetic Materials (I.F:3.097) (2023) Vol.574, Art.No. 170682, DOI:1016/j.jmmm.2023.170682, Elsevier B.V, ISSN: 3048853
	Numerical simulation of wave impact and high pressure characteristics due to violent sloshing in a rectangular tank Sanapala V.S; Selvaraj T; Ananthasivan K; Patnaik B.S.V. Ships and Offshore Structures (I.F:1.934) (2023), DOI:1080/17445302.2023.2195258,Taylor and Francis , ISSN: 17445302
	Performance evaluation of plasma nitrided 316L stainless steel during long term high temperature sodium exposure Singh A; Thirumurugesan R; Krishnakumar S; Rani R; Chandramouli S; Parameswaran P; Mythili R. Nuclear Engineering and Technology (I.F:2.817) (2023) Vol.55(4), pp.1468-1475, DOI: 10.1016/j.net.2022.12.019,Korean Nuclear Society, ISSN: 17385733
	Raman studies in Al+ implanted semi insulating 6H-SiC Kamalakkannan K; Rajaraman R; Sundaravel B; Amarendra G; Sivaji K. Materials Letters (I.F:3.574) (2023) Vol.344, Art. No.134404, DOI:1016/j.matlet.2023.134404, Elsevier B.V, ISSN: 0167577X
	Recent advances in biodegradable polymers - Properties, applications and future prospects Mukherjee C; Varghese D; Krishna J.S; Boominathan T; Rakeshkumar R; Dineshkumar S; BrahmanandaRao C.V.S; Sivaramakrishna A. European Polymer Journal (I.F:5.546) (2023) Vol.192, Art. No.112068, DOI:1016/j.eurpolymj.2023.112068, Elsevier, ISSN: 143057
	Sensitivity of cloud microphysics on the simulation of heavy rainfall in WRF- a case study for the 7-10 August 2019 event over Kerala, India Gorja M.M.K; Challa V.S; Viswanadhapalli Y; Vissa N.K; Balasubramanian V. Atmospheric Research (I.F:5.965) (2023) Vol.288Art. No.106715, DOI:1016/j.atmosres.2023.106715, Elsevier, ISSN: 1698095
	Strength evaluation of support frame of the low level liquid effluent pipes of nuclear plant Suganya P; Swaminathan G; Anoop B. Materials Today: Proceedings (2023), DOI:1016/j.matpr.2023.03.493, Elsevier, ISSN:22147853
	Structure and Optical Properties of Sodium Aluminium Phosphate Glass Matrix Containing Lanthanide Oxides (Ce, Pr, Nd and Gd) Barik S.K; Senapati A; Chakraborty S; Ananthasivan K. Journal of Inorganic and Organometallic Polymers and Materials (I.F:3.518) (2023) DOI:1007/s10904-023-02645-5, Springer, ISSN: 15741443
	Study of atmospheric dispersion of radioactive effluents under inversion condition at coastal station Kalpakkam for radiological impact Kundu D; Srinivas C.V; Gopalakrishnan V; Chandrasekaran S; Athmalingam S; Venkatraman B. Meteorology and Atmospheric Physics (I.F:2.292); (2023) Vol.135(3) Art. No.22, DOI:1007/s00703-023-00962-5,Springer, ISSN: 1777971
	Study on the microstructure and mechanical properties of hybrid laser + MIG welded joints of 316LN stainless steel Pavan A.R; Arivazhagan B; Vasudevan M; Prasanthi T.N; Sudha C. Optics and Laser Technology (I.F:4.939) (2023) Vol.163 Art. No.109410, DOI:1016/j.optlastec.2023.109410,Elsevier,ISSN: 303992
	Synergistic enhancement of corrosion protection of carbon steels using corrosion inhibitors and biocides: Molecular adsorption studies, DFT calculations and long-term Anandkumar B; Krishna N.G; Solomon R.V; Nandakumar T; Philip J. Journal of Environmental Chemical Engineering (I.F:7.968) (2023) Vol.11(3), Art. No.109842, DOI:1016/j.jece.2023.109842,Elsevier , ISSN: 22133437
	Synthesis and characterization of 9Cr ODS F/M steel with optimized Y2O3 and Ti content and its comparison with P91 steel Parida P.K; Dasgupta A; Bajpai S; Sakthivel T; Mythili R. Powder Technology (I.F:5.64); (2023) Vol.425, Art. No.118564, DOI:1016/j.powtec.2023.118564, Elsevier B.V, ISSN: 325910
	The fate of reverse micellar aggregation in irradiated diglycolamide in n-dodecane solution Parvathy N; Rama Swami K; Prathibha T; Venkatesan K.A. New Journal of Chemistry (I.F:3.925) (2023) DOI:1039/d3nj00239j,Royal Society of Chemistry, ISSN: 11440546
	Thermal analysis of thin P91 steel using FlexPDE and SYSWELD Zubairuddin M; Albert S.K; Reddy M.S; Ali B; Varaprasad B; Mishra A; Das P.K; Elumalai P.V. Materials Today: Proceedings (2023) Vol.72, pp.1550-1555 DOI:1016/j.matpr.2022.09.385, Elsevier, ISSN: 22147853
	Type IV Damage Evolution during Creep of 316LN SS-P91 Steel Dissimilar Weld Joint Vijayanand V.D; Awale D.D; Ballal A.R; Thawre M.M; Prasad Reddy G.V. Journal of Materials Engineering and Performance (I.F:2.036) (2023) DOI:1007/s11665-023-08189-6, Springer, ISSN: 10599495

IGCAR Publication during March 2023 (Source: Scopus)

	A Fan-Controlled Sodium-to-Air Heat Exchanger Configuration for Failsafe Decay Heat Removal in Sodium-Cooled Fast Reactors Arul A.J; Patel P.R; Shukla D.K. Nuclear Technology (I.F:1.667); 2023, ISSN 295450; DOI: 10.1080/00295450.2023.2175584
	A novel ultrasonic non-destructive testing methodology to monitor fatigue crack growth in compact tension specimens Abraham S.T; Babu M.N; Venkatraman B. Review of Scientific Instruments (I.F:1.843); 2023, Vol.94(3), Art No. 35108 ISSN 346748; DOI: 10.1063/5.0142176
	An experimental investigation on the combined effect of plastic deformation and grain size variation on the acoustic nonlinearity parameter Abraham S.T; Mouni C.T; Albert S.K; Sagdeo A; Balasubramaniam K; Venkatraman B. Review of Scientific Instruments (I.F:1.843); 2023, Vol.94(2), Art No. 24903 ISSN 346748; DOI: 10.1063/5.0136642
	Bias correction of CMIP6 simulations of precipitation over Indian monsoon core region using deep learning algorithms Kesavavarthini T; Rajesh A.N; Venkata Srinivas C; Kumar T.V.L. International Journal of Climatology (I.F:3.651); 2023 ISSN 8998418; DOI: 10.1002/joc.8056
	Calorimetric measurements on GdAl3 intermetallic compound Nedumaran S; Kandan R; Senapati A; Kumaresan R. Journal of Thermal Analysis and Calorimetry (I.F:4.755); 2023, Vol.148(6), pp. 2605- 2613 ISSN 13886150; DOI: 10.1007/s10973-022-11879-3
	Correlating CSL Evolution and Strain Energy in Single Step Grain Boundary Engineered Austenitic Stainless Steel Palaparti D.P.R; Vijayanand V.D; Mariappan M; Reddy G.V.P. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (I.F:2.726); 2023 ISSN 10735623; DOI: 10.1007/s11661-023-07003-1
	Design and Suitability Analysis of FPGA-Based TCP/IP Offload Module for Control Systems of FBRs Gour A; Mathews T; Behera R.P. Nuclear Technology (I.F:1.667); 2023 ISSN 295450; DOI: 10.1080/00295450.2023.2171664
	Design of experiments for the optimization of U(VI) reduction with hydrogen over Pt/SiO2 Ramakrishna Reddy S; Desigan N; Venkatesan K.A; Sivaraman N; Ananthasivan K. Radiochimica Acta (I.F:2.083); 2023, Vol.111(3), pp. 177-188 ISSN 338230; DOI: 10.1515/ract-2022-0049
	Effect of Microstructure Evolution on the Mechanical Properties of P92 Steel during Long-Term Thermal Aging Sakthivel T; Vasudevan M; Parameswaran P. Materials Performance and Characterization (I.F:0.717); 2023, Vol.12(1), pp.45-63 ISSN 21653992; DOI: 10.1520/MPC20220071
	Evaluation of strength in stainless steel weld joints using ball indentation technique Pavan A.R; Ganesh Kumar J; Arivazhagan B; Vasudevan M. Materials Science and Technology (United Kingdom) (I.F:2.06); 2023 ISSN 2670836; DOI: 10.1080/02670836.2023.2180892
	Fatigue crack growth analysis in polymeric materials Sadananda K; Iyyer N; Vasudevan A.K; Nani Babu M. Journal of Polymer Engineering (I.F: 1.624); 2023 ISSN 3346447; DOI: 10.1515/polyeng-2022-0301
	Gibbs Energy of Formation of U2Mo and U2Ti Determined by EMF Measurements in LiCl...KCl...UCl3 Melt Vijay S.K; Pakhui G; Jain A; Ghosh S. Thermochimica Acta (I.F:3.378); 2023, Vol.724, Art No. 179483 ISSN 406031; DOI: 10.1016/j.tca.2023.179483
	Highly sensitive and wide range hydrogen sensor based on thin films of AgInO2 by pulsed laser deposition Beatriceveena T.V; Gnanasekar K.I Sensors and Actuators B: Chemical (I.F:9.221); 2023, Vol.383, Art No. 133599 ISSN 9254005; DOI: 10.1016/j.snb.2023.133599
	Improved piezoelectric and electric field-induced strain properties in Eu3+ modified 0.42PMN0.32PT ceramics Gowthami S; Anandha Babu G; Manikandan C; Varadarajan E; Sarguna R.M. Applied Physics A: Materials Science and Processing (I.F:2.983); 2023, Vol.129(4), Art No. 239 ISSN 9478396; DOI: 10.1007/s00339-023-06519-y
	Improvements in the Metallography of Ferritic–Martensitic Steels Through a Color Etching Procedure Mandal M; Aashranth B; Samantaray D; Vasudevan M. Metallography, Microstructure, and Analysis , 2023, Vol.12(1), pp.49-61 ISSN 21929262; DOI: 10.1007/s13632-022-00916-0
	Insights into the stability of retained austenite during wear Neog S.P; Lodh A; Karmakar A; Nair A.G; Dasgupta A; Bakshi S.D; Das S. Philosophical Magazine (I.F:1.948); 2023, Vol.103(3), pp.203-222 ISSN 14786435; DOI: 10.1080/14786435.2022.2139421
	Interaction of air plasma-sprayed spinel and yttria coatings with ultra-high temperature ceramic-metal hot-melt Varghese P; Vaishnavi Krupa B.R; Vetrivendan E; Shukla P.K; Rao E.H; Ningshen S. Ceramics International (I.F:5.532); 2023 ISSN 2728842; DOI: 10.1016/j.ceramint.2023.03.114
	Ligand Effect on Physicochemical Properties of Ionic Liquid Rout A; Mishra S. ChemPhysChem (I.F:3.52); 2023 ISSN 14394235; DOI: 10.1002/cphc.202200802
	Liquid-sodium compatibility of plasma-sprayed Titania-Stabilized Zirconia, Lanthanum Zirconate, and Yttrium Aluminum Monoclinic coatings Varghese P; Vetrivendan E; Vaishnavi Krupa B.R; Shukla P.K; Rao E.H; Ningshen S. Surface and Coatings Technology (I.F:4.865); 2023, Vol. 458, Art No. 129353 ISSN 2578972; DOI: 10.1016/j.surfcoat.2023.129353
	Magnetic pulse welding of thin walled ferritic martensitic steel T91 tube to T91 rod Sharma S.K; Aravind J.M.V.V.S; Mishra S; Rani R; Siddiqui O; Verma R; Chakravorty G; Das C; Sharma A. Materials Today: Proceedings , 2023 ISSN 22147853; DOI: 10.1016/j.matpr.2023.02.268
	Microstructural manifestation and kinetics of dynamic transformation in a W- modified 9%Cr steel Mandal M; Aashranth B; Samantaray D; Davinci M.A; Shankar V; Vasudevan M. Materials Science and Technology (United Kingdom) (I.F:2.06); 2023, Vol.39(7), pp.865-875 ISSN 2670836; DOI: 10.1080/02670836.2022.2151091
	Microstructure and mechanical properties characterization of aged and repair welded Alloy 617M Unikela B; Dey H.C; Albert S.K. Welding in the World (I.F:1.984); 2023 ISSN 432288; DOI: 10.1007/s40194-023-01497-4
	Modeling and Validation Studies on Solidification of Sodium Nitrate and LiCl-KCl Sujish D; Joseph J; Mythili M; Muralidharan B; Ponraju D. Chemical Engineering and Technology (I.F:2.215); 2023 ISSN 9307516; DOI: 10.1002/ceat.202200483
	Morphological and optical investigations on Gd2O3 nanostructures Jegadeesan P; Sen S; Padmaprabu C; Srivastava S.K; Das A; Amirthapandian S. Inorganic Chemistry Communications (I.F:3.428); 2023, Vol.150, Art No. 110493 ISSN 13877003; DOI: 10.1016/j.inoche.2023.110493
	Nitric Acid Corrosion of As-Received and Autoclaved Zircaloy-4 in All Zr-4 Nitric Acid Test Facility Shankar A.R; Sole R; Krishna D.N.G; Philip J. Journal of Materials Engineering and Performance (I.F:2.036);2023 ISSN 10599495; DOI: 10.1007/s11665-023-07945-y
	Performance of cooling system of a fast reactor sub-assembly storage facility during station blackout Mishra V.K; Panda S.K; Sen B; Maiya M.P; Samantaray D. Progress in Nuclear Energy (I.F:2.461); 2023, Vol.158, Art No. 104592 ISSN 1491970; DOI: 10.1016/j.pnucene.2023.104592
	Physical insights into the grain size effect on the electrical properties of nanocrystalline La2Zr2O7 pyrochlores Kaliyaperumal C; Marndi S.K; Sankarakumar A; Paramasivam T. Ceramics International (I.F:5.532); 2023, Vol.49(7), pp. 10663-10672 ISSN 2728842; DOI: 10.1016/j.ceramint.2022.11.254
	Polarization resistance of Pt/YSZ and ITO/YSZ interfaces in multilayered Pt|YSZ|Pt and ITO|YSZ|ITO thin films Ravindranath N.A; Clinsha P.C; Pandian R; Natarajan G; Bahuguna A; S A; Sivaraman N; Gnanasekar K.I. Surfaces and Interfaces (I.F:6.137); 2023, Vol.37, Art No. 102700 ISSN 24680230; DOI: 10.1016/j.surfin.2023.102700
	Separation of Plutonium from Other Actinides and Fission Products in Ionic Liquid Medium Rout A. Separation and Purification Reviews (I.F:7.889); 2023, Vol.52(2), pp.98-122 ISSN 15422119; DOI: 10.1080/15422119.2022.2043376
	Simulation of decay heat removal by active means following emergency shutdown in SFRs Vikram G; Natesan K; Rajendrakumar M; Raghupathy S. Progress in Nuclear Energy (I.F:2.461); 2023, Vol.159, Art No. 104646 ISSN 1491970; DOI: 10.1016/j.pnucene.2023.104646
	Studies on the effect of In3+ ion on magnetic and magneto caloric properties of polycrystalline TbMnO3 Soumya S; Vinod K; Harsita M; Sreelatha K; Durga Rao T; Ramesh Kumar K; Rout J.R; Gangopadhyay P; Bhatnagar A.K; Sattibabu B. Journal of Solid State Chemistry (I.F:3.656); 2023, Vol.322, Art No. 123971 ISSN 224596, DOI: 10.1016/j.jssc.2023.123971
	Tensile Deformation Study on Heat Affected Zone of Mod. 9Cr-1Mo Steel Weld Nikhil R; Krishnan S.A; Moitra A; Vasudevan M. Journal of Materials Engineering and Performance (I.F: 2.036); 2023, Vol.32(5), pp.2288-2297 ISSN 10599495; DOI: 10.1007/s11665-022-07279-1
	The complexation of lanthanides by glycolamide extractants: Evidences from electronic spectroscopy and DFT calculations Prathibha T; Kumar S; Chandra S; Maji S; Ramanathan N. Inorganica Chimica Acta (I.F:3.118); 2023, Vol.548, Art No. 121396 ISSN 201693; DOI: 10.1016/j.ica.2023.121396
	The Prominence of Facilitator Holes: The Classic N↠N Pnictogen Bonding in Nitrobenzene-Ammonia Dimer with its Structural Elucidation and Experimental Characterization at Low Temperatures Chandra S; Mahapatra N; Ramanathan N; Sundararajan K. Chemistry - A European Journal (I.F:5.02); 2023 ISSN 9476539; DOI: 10.1002/chem.202203976
	Wiped film evaporator with a roller wiper and an internally mounted condenser for the recovery of TBP and n-DD from degraded PUREX solvent Vishnu Anand P; Mishra S; Gnanasoundari J; Rajeev R; Desigan N; Velavendan P; Venkatesan K.A; Ananthasivan K. Chemical Engineering Research and Design (I.F: 4.119); 2023, Vol.192, pp.223-238 ISSN 2638762; DOI: 10.1016/j.cherd.2023.02.027

IGCAR Publication during February 2023 (Source: Scopus)

	A Back-stress deconvolution method towards modelling of low cycle fatigue behavior of Type 316L(N) stainless steel at room temperature Kumar Pandey D; Kumar Verma P; Bhattacharyya A; Sarkar A. International Journal of Fatigue (I.F:5.489); 2023, Vol.166, Art No. 107297 ISSN 1421123; DOI: 10.1016/j.ijfatigue.2022.107297
	A biosensor for monitoring of salt stress in plants Sneha M; Ravindranath N.A; Murugesan N; Jayaraman V. Organic Electronics (I.F:3.868); 2023, Vol. 113, Art No. 106698 ISSN 15661199; DOI: 10.1016/j.orgel.2022.106698
	A novel macroscopic computational methodology to predict the locations and orientation of solidification-cracks: Application to pulsed laser welding Satbhai O; ProtimNeog S; Karagadde S; Samajdar I; Jaya B.N; Kumar H; Ravikumar R; Mythili R; Ghosh C; Dasgupta A. International Journal of Heat and Mass Transfer (I.F: 5.584); 2023, Vol. 204, Art No. 123835 ISSN 179310; DOI: 10.1016/j.ijheatmasstransfer.2022.123835
	A scheme for a priori generation of the optical patterns for magnetic nanoemulsion based defect detection in carbon steel specimens Nandy M; Lahiri B.B; Philip J. NDT and E International (I.F: 4.683); 2023, Vol.136, Art No. 102810 ISSN 9638695; DOI: 10.1016/j.ndteint.2023.102810
	Amino-functionalized graphene oxide membranes for efficient separation of Sr2+ions Vishwakarma R.K; Narayanam P.K; Umamaheswari R; Polaki S.R. Journal of Water Process Engineering (I.F:7.34); 2023, Vol. 51, Art No. 103329 ISSN 22147144; DOI: 10.1016/j.jwpe.2022.103329
	Anomalies of Brillouin Light Scattering in Selected PerovskiteRelaxor Ferroelectric Crystals Sivasubramanian V; Ganesamoorthy S; Kojima S. Materials (I.F:3.748); 2023, Vol.16(2), Art No. 605, ISSN 19961944; DOI: 10.3390/ma16020605
	Antimicrobial property of polyvinyl alcohol films containing extracts of Lawsoniainermis and Tamarindusindica Jayakumar S; Philip J. Journal of Polymer Research (I.F: 2.67); 2023, Vol. 30(3), Art No.108 ISSN 10229760; DOI: 10.1007/s10965-023-03485-0
	Binder-free vertical grapheme nanosheets templated NiO petals for high-performance supercapacitor applications Kumar V.M; Polaki S.R; Krishnan R; Sarguna R.M; Mathews T. Journal of Alloys and Compounds (I.F:6.371); 2023, Vol. 931, Art No. 167420 ISSN 9258388; DOI: 10.1016/j.jallcom.2022.167420
	Characterization of the microstructure and mechanical properties of activated tungsten inert gas welded and hot-wire tungsten inert gas welded super Sunny K.T; Korra N.N; Muthukumaran V; Arivazhagan B. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (I.F:2.663); 2023, Vol. 237(2), pp. 469-481 ISSN 14644207, DOI: 10.1177/14644207221118438
	Chromoionophore decorated renewable solid-state polymer monolithic naked eye sensor for the selective sensing and recovery of ultra-trace toxic cadmium ions in aqueous environment Srinivasan P; Madhu D.K; PeduguSivaraman S; Kuppusamy S; Nagarajan S; Rao C.V.S.B; Kancharlapalli Chinaraga P; Mohan A.M; Deivasigamani P. Colloids and Surfaces A: Physicochemical and Engineering Aspects (I.F:5.518); 2023, Vol. 656, Art No. 130377, ISSN 9277757; DOI: 10.1016/j.colsurfa.2022.130377
	Collective stabilization through n and P phosphorous bonding with cooperative halogen and hydrogen bonding in POCl3-Nitrile dimers: Matrix isolation infrared spectroscopic and ab initio computational studies Suryaprasad B; Chandra S; Ramanathan N; Sundararajan K. Journal of Molecular Structure (I.F: 3.841); 2023, Vol. 1278, Art No.134916 ISSN 222860; DOI: 10.1016/j.molstruc.2023.134916
	Comparison of the performance of solvent wash reagents used for the primary cleanup of degraded PUREX solvent Mishra S; Mukhopadhyaya C; Patra C; Panantharayil V.A; Rajesh P; Sivakumar D; Desigan N; Dhamodharan K; Velavendan P; Rajeev R.P; Venkatesan K.A. RadiochimicaActa (I.F:2.083); 2023, Vol. 111(1), pp.53-62 ISSN 338230; DOI: 10.1515/ract-2022-0079
	Composition and Microstructure of Ag70Pd20Au10 Alloy Specimens with Etching and Their Catalytic Activity to Decomposition of Hydrogen Peroxide Devi G.N; Renjith R; Suresh G; Sornadurai D; Rajaraman R; Viswanath R.N. Catalysis Letters (I.F: 2.795); 2023, Vol.153(1), pp.239-247 ISSN 1011372X; DOI: 10.1007/s10562-022-03972-x
	Computational fluid dynamics simulation of hybrid laser-MIG welding of 316 LN stainless steel using hybrid heat source Unni A.K; Vasudevan M. International Journal of Thermal Sciences (I.F:4.779); 2023, Vol. 185, Art No. 108042 ISSN 12900729; DOI: 10.1016/j.ijthermalsci.2022.108042
	Corrosion behaviour of P-91 steel and type 316 LN stainless steel with and without a ceramic coating in the lead with oxygen at 550°C Priya R; Ningshen S. Journal of Nuclear Materials (I.F:3.555); 2023, Vol. 574, Art No. 154181 ISSN 223115; DOI: 10.1016/j.jnucmat.2022.154181
	Creep-fatigue interaction behavior of simulated microstructures and the actual weldment of P91 steel Mariappan K; Nagesha A. Materials Science and Engineering A (I.F: 6.004); 2023, Vol. 866, Art No. 144695 ISSN 9215093; DOI: 10.1016/j.msea.2023.144695
	Crystal structure, dielectric and magnetic studies of pure and Sr substituted LaFeO3 single crystal grown by optical floating zone technique Sivakumar N; Vijayakumar P; Jayavel R; Alsalme A; Alsulami A.S; Yokota Y. Journal of Alloys and Compounds (I.F: 6.371); 2023, Vol. 943, Art No. 169161 ISSN 9258388; DOI: 10.1016/j.jallcom.2023.169161
	Design and Performance Enhancement of Cobalt-Encapsulated Nitrogen-Doped Carbon NanofiberElectrocatalyst through Ionic Liquid Modification for Efficient Parida S.K; Ganguly D; Barik T; Sharma R.K; Amirthapandian S; Jena H; Sundara R. ACS Applied Nano Materials (I.F:6.14); 2023, Vol. 6(3), pp. 1975-1984 ISSN 25740970; DOI: 10.1021/acsanm.2c04945
	Development and validation of transient Thermal-Hydraulic model for SFR steam generators Vikram G; Natesan K; Rajendrakumar M; Pathak S.P. Annals of Nuclear Energy (I.F:1.81), 2023, Vol. 180, Art No. 109490 ISSN 3064549; DOI: 10.1016/j.anucene.2022.109490
	Development of marine activated algal-bacterial granule: A novel replacement to the conventional algal remediation processes Uma V.S; Panigrahi S; Chandrasekaran S; Srinivas C.V; Venkatraman B. Algal Research (I.F: 5.276); 2023, Vol. 69, Art No. 102914 ISSN 22119264; DOI: 10.1016/j.algal.2022.102914
	EBSD analysis of spark plasma sintered SS316-B4C composite Baranidharan K; ThirumalaiKumaran S; Uthayakumar M; Parameswaran P; Babu D.A. Micron (I.F:2.381); 2023, Vol. 166, Art No. 103401 ISSN 9684328; DOI: 10.1016/j.micron.2022.103401
	Effect of addition of Nb on phase stability of equiatomicCrFeMoV alloy Saikumaran A; Mythili R. Materials Chemistry and Physics (I.F:4.778); 2023, Vol. 294, Art No. 127013 ISSN 2540584; DOI: 10.1016/j.matchemphys.2022.127013
	Effect of europium on the structural and thermal properties of pristine iron phosphate glass Vijay S.K; Madhavan R.R; Chakraborty S; Jain A; Joseph K. Journal of Thermal Analysis and Calorimetry (I.F:4.755); 2023, Vol. 148(2), pp.321-328 ISSN 13886150; DOI: 10.1007/s10973-022-11749-y
	Effect of Internal Decay Power and Surface Cooling on Nuclear Fuel Droplet Solidification During MFCI in a SFRA Numerical Study Kumar M.C; Sudha A.J; Subramanian V; Athmalingam S; Venkatraman B. Nuclear Science and Engineering (I.F: 1.9); Vol. 197(1), pp. 132-143 ISSN 295639; DOI: 10.1080/00295639.2022.2103338
	Effect of pre-adsorbed moisture and humidity on characteristics of Si PIN diode Karrevula V.R; Prasad A.K; Mishra V; Tripurasundari S. Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment (I.F: 1.36); 2023, Vol. 1047, Art No. 167832 ISSN 1689002; DOI: 10.1016/j.nima.2022.167832
	Effect of Surface Preparation on the Air Oxidation Behaviour of Modified 9Cr1 Mo Steel JagadeeswaraRao C; Archana M; Ningshen S. Transactions of the Indian Institute of Metals (I.F:1.391); 2023, Vol. 76(1), pp. 67-75 ISSN 9722815; DOI: 10.1007/s12666-022-02727-x
	Effect of thermomechanical treatment and tempering temperature on microstructure and tensile properties of India specific reduced activation ferritic Anil Kumar P; Vanaja J; Prasad Reddy G.V; NageswaraRao G.V.S. Journal of Nuclear Materials (I.F:3.555), 2023, Vol. 574, Art No154186 ISSN 223115; DOI: 10.1016/j.jnucmat.2022.154186
	Enhanced microwave dielectric properties of ZnNb2O6 by heterovalent ion substitution Kumar A.V; Subramanian V; Sivasubramanian V. Journal of Alloys and Compounds (I.F: 6.371); 2023, Vol. 944, Art No. 169202 ISSN 9258388; DOI: 10.1016/j.jallcom.2023.169202
	Evaluation of leaching behaviour of Ndfrom Ca10-xNdx(PO4)F2, (x = 1.2) matrix and its borosilicate glass-bonded analogues by neutron activation and ICP-OES analysis Lindsay S.A; Sriram S; Chand M; Annapoorani S; Lakshmi K.U; Jena H; Vijayalakshmi S; Kumar R; Jayaraman V. Chemical Papers (I.F: 2.078); 2023, Vol. 77(1), pp. 509-516 ISSN 3666352; DOI: 10.1007/s11696-022-02391-x
	Experimental Investigation of Phase Equilibria and Phase Transformation Kinetics in the U-Cr System by Using DSC, XRD, and SEM Samanta B; Yadav R.K. Journal of Phase Equilibria and Diffusion (I.F: 1.606); 2023 ISSN 15477037; DOI: 10.1007/s11669-022-01021-z
	Exposure and carcinogenic risk assessment of trihalomethanes (THMs) for water supply consumers in Addis Ababa, Ethiopia Tafesse N; Porcelli M; Hirpessa B.B; Gasana J; Padhi R.K; Garie S.R; Ambelu A. Toxicology Reports (I.F: 4.81); 2023, Vol. 10, pp. 261-268 ISSN 22147500; DOI: 10.1016/j.toxrep.2023.02.004
	Failure analysis of a reducer section in the creep loop of INSOT facility Prasanthi T.N; Sudha C; Chandran T; Shanmughavel M; Ganesan V; Chandra Mouli S; Prasad Reddy G.V; Suresh Kumar V.A; Sreedhar B.K. Engineering Failure Analysis (I.F: 3.634 ); 2023, Vol. 144, Art No. 106991 ISSN 13506307; DOI: 10.1016/j.engfailanal.2022.106991
	Failure Analysis of Large Stroke Welded Disk Bellows in Storage Krovvidi S.C.S.P.K; Das C.R; Toppo A; Ramesh E; Ravikumar R; Suresh L; Parthasarathi N.L; Mahadevan S; Albert S.K; Sureshkumar K.V; Raghupathy S. Journal of Failure Analysis and Prevention (I.F: 1.159); 2023, Vol. 23(1), pp. 245-257 ISSN 15477029, DOI: 10.1007/s11668-022-01570-y
	Fast and selective reversed-phase high performance liquid chromatographic separation of UO22+ and Th4+ ions using surface modified C18 silica monolithic supports with target specific ionophoric ligands Kongasseri A; Madhesan T; Mitra S; Rao C.V.S.B; Nagarajan S; Chinaraga P.K; Deivasigamani P; Mohan A.M. RSC Advances (I.F: 4.036); 2023, Vol. 13(5), pp.3317-3328 ISSN 20462069; DOI: 10.1039/d2ra07495h
	Fatigue Crack Growth Behavior of Nitrogen-Alloyed Low-Carbon Austenitic Stainless Steel at Room Temperature Duraipandi R; NaniBabu M; Moitra A. JOM (I.F: 2.973); Vol. 75(2), pp. 478-487 ISSN 10474838; DOI: 10.1007/s11837-022-05622-4
	Feasibility studies on the detection of third phase formation in the solvent extraction equipment during reprocessing of fast reactor spent fuels Suba M; Lawrenec F; Velavendan P. Progress in Nuclear Energy (I.F:2.461); 2023, Vol. 157, Art No. 104550 ISSN 1491970; DOI: 10.1016/j.pnucene.2022.104550
	Gold nanoparticle decorated vertical graphenenanosheets composite/hybrid for acetone sensing at room temperature Geramilla M; Muthukumaravel C; Karunakaran U; Sairam T.N. Materials Science and Engineering B: Solid-State Materials for Advanced Technology (I.F:3.407); 2023, Vol. 288, Art No: 116211 ISSN 9215107; DOI: 10.1016/j.mseb.2022.116211
	Highly Selective Room Temperature Detection of NH 3 and NOxUsing Oxygen-Deficient W18O49- Supported WS2Heterojunctions Manoharan M; Govindharaj K; Muthumalai K; Pandian R; Haldorai Y; Rajendra Kumar R.T. ACS Applied Materials and Interfaces (I.F:10.383); 2023, Vol. 15(3), pp. 4703-4712 ISSN 19448244; DOI: 10.1021/acsami.2c18732
	Impact of sea-breeze circulation on the characteristics of convective thunderstorms over southeast India Reddy B.R; Srinivas C.V; Venkatraman B. Meteorology and Atmospheric Physics (I.F:2.292); 2023, Vol.135(1), Art No.5 ISSN 1777971; DOI: 10.1007/s00703-022-00941-2
	Improvement of sensitization and intergranular corrosion of AISI type 304L stainless steel through thermo-mechanical treatment Shit G; Mariappan K; Ningshen S. Corrosion Science (I.F: 8.104); 2023, Vol. 213, Art No. 110975 ISSN 0010938X; DOI: 10.1016/j.corsci.2023.110975
	Influence of Heat Treatment Condition on Tensile Properties of AM350 Stainless Steel Kumar Krovvidi S.C.S.P; Das C.R; Goyal S; Arun Kumar S; Mahadevan S; Albert S.K; Raghupathy S. Transactions of the Indian Institute of Metals (I.F:1.391); 2023, Vol. 76(1), pp.87-95 ISSN 9722815; DOI: 10.1007/s12666-022-02726-y
	Integrity Assessment of 10Cr Ferritic Steel/Alloy 617M Dissimilar Metal Weld Joint under Creep Condition Sakthivel T; Dey H.C; Parida P.K; Reddy G.V.P; Vasudevan M; Albert S.K. Journal of Materials Engineering and Performance (I.F:2.036); 2023 ISSN 10599495; DOI: 10.1007/s11665-023-07802-y
	Interfacial interaction driven enhancement in the colossal magnetoresistance property of ultra-thin heterostructure of Pr0.6Sr0.4MnO3 in proximity with Pr0.5Ca0.5MnO3 Gayathri V; Amaladass E.P; Sathyanarayana A.T; GeethaKumary T; Pandian R; Gupta P; Rai S.K; Mani A. Scientific Reports (I.F: 4.996); 2023, Vol. 13(1), Art No. 2315 ISSN 20452322; DOI: 10.1038/s41598-023-28314-8
	Investigating the Magnetocaloric Properties of Magnetically Frustrated Delafossite: AgCrO2 Murugan K; Sathyanarayana A.T; Govindaraj P; Paulraj S; Mani A; Venugopal K. Journal of Electronic Materials (I.F: 1.815); 2023, Vol. 52(3), pp.1652-1661 ISSN 3615235; DOI: 10.1007/s11664-022-10014-0
	Investigation of axial Flow-Induced vibration in a single fuel Sub-Assembly due to radial clearance Eswaran M; Sajish S.D; Anup K.P; Suresh K.S; Dudala N.S; Sreedhar B.K; Raghupathy S. Annals of Nuclear Energy (I.F:1.81); 2023, Vol. 181, Art No. 109546 ISSN 3064549; DOI: 10.1016/j.anucene.2022.109546
	Ionization-induced annealing of defects in 3CSiC: Ion channeling and positron annihilation spectroscopy investigations Sreelakshmi N; Umapathy G.R; Abhaya S; David C; Ojha S; Amirthapandian S. Journal of Materials Research (I.F:2.909); 2023 ISSN 8842914; DOI: 10.1016/j.anucene.2022.109546
	Laser intensity mapping across a spatial light modulator to generate uniform and aberration-free focal spots Gupta D.K; Ravindran T.R. Optics Communications (I.F:2.335); 2023, Vol. 530, Art No. 129187 ISSN 304018; DOI: 10.1016/j.optcom.2022.129187
	Lead-Free Stable Wide-Band-Gap Double Perovskite with Absorption in the Visible Region Saha P; Nithya R; Sen S. Journal of Electronic Materials (I.F: ); 2023, ISSN 3615235; DOI: 10.1007/s11664-023-10262-8
	Magnetic nanofluids (Ferrofluids): Recent advances, applications, challenges, and future directions Philip J. Advances in Colloid and Interface Science (I.F: 15.19); 2023, Vol. 311, Art No. 102810 ISSN 18686; DOI: 10.1016/j.cis.2022.102810
	Microstructure and Tensile Properties of Dissimilar Weld Joint Between Alloy 800 and Buttered Grade 91 PanneerSelvi S; Prasad Reddy G.V. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (I.F:2.726 ); 2023, Vol. 54(3), pp.939-951 ISSN 10735623; DOI: 10.1007/s11661-022-06941-6
	Modeling of sodium-cooled fast reactor core A sensitivity study on number of core channels and axial meshes Vikram G; Riyas A; Bachchan A; Rajendrakumar M; Devan K; Natesan K. Nuclear Engineering and Design (I.F: 1.9); 2023, Vol. 403, Art No. 112136 ISSN 295493; DOI: 10.1016/j.nucengdes.2022.112136
	Molten salt corrosion of candidate materials in LiCl-KCl eutectic for pyrochemical reprocessing applications: A review Chowdari J.R; Ningshen S. Corrosion Reviews (I.F: 3.69); 2023, ISSN 3346005; DOI: 10.1515/corrrev-2022-0044
	Non-isothermal crystallization kinetics study of sodium niobium phosphate glasses Senapati A; Barik S.K; Parida P.K; Jena H. Journal of Non-Crystalline Solids (I.F: 4.458); 2023, Vol. 605, Art No. 122154 ISSN 223093; DOI: 10.1016/j.jnoncrysol.2023.122154
	Novel green emitting Tb3+ doped KCaF3 phosphor for WLEDs and TLD applications Kameshwaran R; Annalakshmi O; K A; Bhargav P.B. Ceramics International (I.F: 5.532); 2023, Vol. 49(5), pp.8005-8014 ISSN 2728842; DOI: 10.1016/j.ceramint.2022.10.316
	Novel Ultraviolet and Ionizing Radiation Detectors Made From TiO Wide-Bandgap Semiconductor Chetry P; George E; Sarin P; Gupta K.D; Suresh K; Navas J; David C; Govindaraj R. IEEE Sensors Journal (I.F: 4.325); 2023, Vol. 23(1), pp.724-732 ISSN 1530437X; DOI: 10.1109/JSEN.2022.3224809
	Numerical simulation of operational transients in sodium-cooled fast reactors Vikram G; Natesan K; Rajendrakumar M. Nuclear Engineering and Design (I.F:1.9); 2023, Vol. 402, Art No. 112116 ISSN 295493; DOI: 10.1016/j.nucengdes.2022.112116
	Performance of cooling system of a fast reactor sub-assembly storage facility during station blackout Mishra V.K; Panda S.K; Sen B; Maiya M.P; Dipti Samantaray; Progress in Nuclear Energy (I.F:2.461); 2023, Vol. 158, Art No. 104592 ISSN 1491970; DOI: 10.1016/j.pnucene.2023.104592
	Predicting residual stress in a 316L electron beam weld joint incorporating plastic properties derived from a crystal plasticity finite element model Mokhtarishirazabad M; McMillan M; Vijayanand V.D; Simpson C; Agius D; Truman C; Knowles D; Mostafavi M. Int. J of Pressure Vessels & Piping (I.F:2.56); 2023, Vol. 201, Art No. 104868, ISSN 3080161; DOI: 10.1016/j.ijpvp.2022.104868
	Preparation, physicochemical characterization, and AC induction heating properties of colloidal aggregates of ferrimagnetic cobalt ferrite nanoparticles coated with a bio-compatible polymer Rout A; Mishra S; Ramanathan N. ChemistrySelect (I.F: 2.307); 2023, ISSN 2728842; DOI: 10.1016/j.ceramint.2023.01.101
	Presence of a Molecular Ligand alters the Solvent Behavior of an Ionic Liquid: A Combined Physicochemical Properties, FTIR Spectroscopy and Dynamic Light Scattering Investigation Rout A; Mishra S; Ramanathan N. ChemistrySelect (I.F: 2.307); 2023, Vol. 8(5); Art No. 202204389 ISSN 23656549; DOI: 10.1002/slct.202204389
	Pressure-Induced Phase Transition in MultilayeredVanadiumDiselenideNanosheets Mishra K.K; Pandey K.K; Sree Raj K.A; Rout C.S; Ravindran T.R; Chandra S; Katiyar R.S. Journal of Physical Chemistry C (I.F: 4.177); 2023, Vol. 127(1), pp. 368-380 ISSN 19327447; DOI: 10.1021/acs.jpcc.2c06694
	Purification and quality control of the radiopharmaceutical 89SrCl2 produced in FBTR Saha D; Vithya J; Karunakaran R; Kalaiyarasu T; Rajeswari S; Manoravi P; Chand M; Kumar R. Journal of Radioanalytical and Nuclear Chemistry (I.F:1.754); 2023, Vol. 332(1), pp. 33-46 ISSN 2365731; DOI: 10.1007/s10967-022-08714-2
	Quantification of Shear Strain Development in the Through-Thickness Direction During Sliding Wear Neog S.P; Nair A.G; Das Bakshi S; Dasgupta A; Das S. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (I.F: 2.726); 2023, Vol. 54(1), pp. 11-15 ISSN 10735623; DOI: 10.1007/s11661-022-06901-0
	Radiochemical quality control of the radiopharmaceutical, 89SrCl2 produced in FBTR Saha D; Vithya J; Vijayalakshmi S; Chand M; Kumar R. Applied Radiation and Isotopes (I.F:1.787); 2023, Vol. 192, Art No. 110566 ISSN 9698043; DOI: 10.1016/j.apradiso.2022.110566
	Region-wise evaluation of strength and creep behavior of AISI 904L weldments by small specimen testing techniques Sunny K.T; Korra N.N; Muthukumaran V; Ganesh Kumar J; Vasantharaja P. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (I.F:2.663); 2023 ISSN 14644207; DOI: 10.1177/14644207231155036
	Residual stresses study in butt welded joint of Inconel 617 alloy and effect of post weld heat treatment on residual stresses Kumar R; Dey H.C; Pradhan A.K; Mahapatra M.M; Pandey C. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (I.F: 2.663); 2023 ISSN 14644207; DOI: 10.1177/14644207221149205
	RGO nanosheet wrapped Beta-phase NiCu2S nanorods for advanced supercapacitor applications Kandhasamy N; Preethi L.K; Mani D; Walczak L; Mathews T; Venkatachalam R. Environmental Science and Pollution Research (I.F: 5.053); 2023, Vol. 30(7), pp. 18546-18562 ISSN 9441344; DOI: 10.1007/s11356-022-23359-0
	Solid solubility of uranium in Ca-phosphate glass and its impact on heat capacity and Tg of the glass matrix Jena H; Praveena N; Senapati A. Journal of Thermal Analysis and Calorimetry (I.F:4.755); 2023 ISSN 13886150; DOI: 10.1007/s10973-023-11947-2
	Solvent wash studies for the removal of di-butyl phosphate from spent solvent under simulated PUREX condition Mishra S; Anand P.V; Patra C; Sinha P.K; Mukhopadhyay C; Ravi J; Sivakumar D; Desigan N; Rajesh P; Rajeev R; Dhamodharan K; Velavendan P; Venkatesan K.A; Ananthasivan K. Journal of Radioanalytical and Nuclear Chemistry (I.F:1.754); 2023, Vol. 332(20), pp. 343-353 ISSN 2365731; DOI: 10.1007/s10967-022-08729-9
	Spectroscopic determination of the role of vanadyl oxygen in room temperature NH3 sensing by V2O5 nanoparticles Radhakrishnan R.P; Prasad A.K. SpectrochimicaActa - Part A: Molecular and Biomolecular Spectroscopy (I.F: 4.831 ); 2023, Vol. 287, Art No. 122092; ISSN 13861425; DOI: 10.1016/j.saa.2022.122092
	Studies on In-situ regeneration of cold trap of a Bench-Top sodium loop Murugesan N; Faizal V.A; Prabhu E; Shyam Kumar S; Ghosh S; Sree Rama Murthy A; Sudha R; Jena H; Ganesan R; Jayaraman V. Nuclear Engineering and Design (I.F:1.9), 2023, Vol. 403, Art No. 112156 ISSN 295493; DOI: 10.1016/j.nucengdes.2023.112156
	Studies on synthesis, structural and thermal properties of sodium niobium phosphate glasses for nuclear waste immobilization applications Senapati A; Barik S.K; Venkata Krishnan R; Chakraborty S; Jena H. Journal of Thermal Analysis and Calorimetry (I.F:4.755 ); 2023, Vol. 148(2), pp. 355-369 ISSN 13886150; DOI: 10.1007/s10973-022-11760-3
	Synthesis of large 2D oxide nanosheets by virtual substrate method and growth-kinetics studies using prototype CuO/MgO Chandra S; Ganesamoorthy S; Dasgupta A; Bhalerao G.M; Shekar N.V.C. Thin Solid Films (I.F: 2.358); 2023, Vol. 768, Art No. 139726 ISSN 406090; DOI: 10.1016/j.tsf.2023.139726
	Synthesis, structure and luminescence properties of bifunctional KCaF3 phosphor influenced by incorporating Eu3+ ions for solid state lighting and TL dosimetry applications Kameshwaran R; Raja A; Kumar R.R; Daniel DJ; Annalakshmi D.O; Aravinth K; Bhargav PB; Ramasamy P. Applied Radiation and Isotopes (I.F:1.787 ); 2023, Vol. 191, Art No. 110520 ISSN 9698043; DOI: 10.1016/j.apradiso.2022.110520
	Tensile and Ball Indentation Response of Am350 Steel at Room Temperature Kumar Krovvidi S.C.S.P; Ganesh kumar J; Goyal S; Prasad Reddy G.V; Vasudevan M; Raghupathy S. Lecture Notes in Civil Engineering (I.F: 0.46); 2023, Vol. 269, pp. 141-151 ISSN 2366-2557; DOI: 10.1007/978-981-19-3371-413
	The influence of pnicogen bonding in stacked parallel displaced geometry of nitrobenzene dimers: Evidence using matrix isolation infrared spectroscopy and ab initio computations Chandra S; Mahapatra N; Ramanathan N; Sundararajan K. Journal of Molecular Structure (I.F:3.841); 2023, Vol. 1279, Art No. 135022 ISSN 222860; DOI: 10.1016/j.molstruc.2023.135022
	Track detector based discriminative thoron measurement - An optimization study through experiments and modeling Chitra N; Chandrasekaran S; VenkataSrinivas C; Athmalingam S; Venkatraman B. Radiation Physics and Chemistry (I.F:2.776); 2023, Vol. 205, Art No. 110755 ISSN 0969806X; DOI: 10.1016/j.radphyschem.2022.110755
	Very High Cycle Fatigue Behavior of Austenitic Stainless Steel in Annealed and Predeformed Condition Sarkar A; Klusak J; Kozai K; Christ H.-J. Materials Performance and Characterization (I.F: 0.717); 2023, Vol. 12(2) ISSN 21653992; DOI: 10.1520/MPC20220076
	Visualization of Cardiac Vectors using Electrocardiography and Magnetocardiography Bhat V.R; Sengottuvel S; Swain P.P; Anitha H; Gireesan K. IETE Journal of Research (I.F: 1.877); 2023, Vol. 69(1), pp. 220-231 ISSN 3772063; DOI: 10.1080/03772063.2020.1816220
	X-ray diffraction line profile analysis of defects in neutron-irradiated austenitic stainless steels at low displacement damage levels Kumar R.V; Ramachandran D; Sagdeo A. Journal of Nuclear Materials (I.F:3.555); 2023, Vol. 577, Art No. 154338 ISSN 223115; DOI: 10.1016/j.jnucmat.2023.154338

IGCAR Publication during January 2023 (Source: Scopus)

	Disordered spin gapless semiconducting CoFeCrGa Heusler alloy thin films on Si (100): experiment and theory; Mishra V; Kumar A; Pandey L; Gupta N.K; Hait S; Barwal V; Sharma N; Kumar N; Chandra S; Chaudhary S. Nanoscale (I.F: 8.307); 2022, Vol.15 (1), pp.337-349 ISSN 20403364;  DOI: 10.1039/d2nr03424g
	Electroanalytical Chemistry of Lanthanides/Actinides and the Feasibility of Direct Electrodeposition in Ligand Containing Ionic Liquids: A Comprehensive Review; Rout A. Journal of the Electrochemical Society (I.F: 4.386); 2022, Vol.169 (12), Art No. 126502 ISSN 134651; DOI: 10.1149/1945-7111/aca564
	Optimal classification of N-back task EEG data by performing effective feature reduction Patel R; Gireesan K; Baskaran R; Shekar N.V.C.; Sadhana - Academy Proceedings in Engineering Sciences ; (I.F: 1.214); 2022, Vol.47 (4), Art No. 281 ISSN 2562499; DOI: 10.1007/s12046-022-02015-w
	Failure of a Copper Condenser Dashpot Kaul R; Muralidharan N.G; Raghu N; Kasiviswanathan K.V;Raj ; Journal of Failure Analysis and Prevention ; 2022, Vol.22 (5) PP.2064-2072, ISSN 15477029; DOI: 10.1007/s11668-022-01509-3
	Failure of an I-Beam Dayal R.K; Gnanamoorthy J.B; Rodriguez P.; Journal of Failure Analysis and Prevention ; 2022, Vol.22 (5), pp.2059-2063 ISSN 15477029; DOI: 10.1007/s11668-022-01509-3
	(In Press) Highly Selective Room Temperature Detection of NH3 and NOx Using Oxygen-Deficient W18O49-Supported WS2 Heterojunctions Manoharan M; Govindharaj K; Muthumalai K; Pandian R; Haldorai Y; Rajendra Kumar RT.; ACS Applied Materials and Interfaces (I.F: 10.383); 2022 ISSN 19448244; DOI: 10.1021/acsami.2c18732
	(In Press) Improvements in the Metallography of Ferritic–Martensitic Steels Through a Color Etching Procedure Mandal M; Aashranth B; Samantaray D; Vasudevan M.; Metallography, Microstructure, and Analysis; 2022 ISSN 21929262; DOI: 10.1007/s13632-022-00916-0
	Particle preparation of pharmaceutical compounds using supercritical antisolvent process: current status and future perspectives Kumar R; Thakur A.K; Kali G; Pitchaiah K.C; Arya R.K; Kulabhi A.; Drug Delivery and Translational Research (I.F: 5.671); 2022 ISSN: 2190-3948; DOI: 10.1007/s13346-022-01283-7;
	(In Press) Design of experiments for the optimization of U(VI) reduction with hydrogen over Pt/SiO2 Ramakrishna Reddy S; Desigan N; Venkatesan K.A; Sivaraman N; Ananthasivan K.; Radiochimica Acta (I.F: 2.083); 2022 ISSN 338230; DOI: 10.1515/ract-2022-0079
	(In Press) Tunnel barrier to spin filter: Electronic-transport characteristics of transition metal atom encapsulated in a small Cadmium Telluride cage Chavan K.T; Chandra S; Kshirsagar A.; Nanoscale (I.F: 8.307); 2022, Issue 3, ISSN 20403364; DOI: 10.1039/d2nr03424g
	Collective stabilization through n→π* and P…π phosphorous bonding with cooperative halogen and hydrogen bonding in POCl3-Nitrile dimers: Matrix isolation infrared spectroscopic and ab initio computational studies Suryaprasad B; Chandra S; Ramanathan N; Sundararajan K.; Journal of Molecular Structure (I.F: 3.841); 2023, Vol. 1278, Art No. 134916 ISSN 222860; DOI: 10.1016/j.molstruc.2023.134916
	Track detector based discriminative thoron measurement – An optimization study through experiments and modelling Chitra N; Chandrasekaran S; Venkata Srinivas C; Athmalingam S; Venkatraman B.; Radiation Physics and Chemistry (I.F: 2.776); 2023, Vol. 205, Art No. 110755 ISSN 0969806X; DOI: 10.1016/j.radphyschem.2022.110755
	Studies on In-situ regeneration of cold trap of a Bench-Top sodium loop Murugesan N; Faizal V.A; Prabhu E; Shyam Kumar S; Ghosh S; Sree Rama Murthy A; Sudha R; Jena H; Ganesan R; Jayaraman V.; Nuclear Engineering and Design (I.F: 1.9); 2023, Vol. 403, Art No. 112156 ISSN 295493; DOI: 10.1016/j.nucengdes.2023.112156
	Feasibility studies on the detection of third phase formation in the solvent extraction equipment during reprocessing of fast reactor spent fuels Suba M; Lawrenec F; Velavendan P.; Progress in Nuclear Energy (I.F: 2.461); 2023, Vol. 157, Art No. 104550 ISSN 1491970; DOI: 10.1016/j.pnucene.2022.104550
	Modeling of sodium-cooled fast reactor core – A sensitivity study on number of core channels and axial meshes Vikram G; Riyas A; Bachchan A; Rajendrakumar M; Devan K; Natesan K.; Nuclear Engineering and Design (I.F: 1.9); 2023, Vol. 403, Art No. 112136 ISSN 112136; DOI: 10.1016/j.nucengdes.2023.112156
	EBSD analysis of spark plasma sintered SS316-B4C composite Baranidharan K; Thirumalai Kumaran S; Uthayakumar M; Parameswaran P; Babu D.A.; Micron (I.F: 2.381); 2023, Vol. 166, Art No. 103401 ISSN 9684328; DOI: 10.1016/j.micron.2022.103401
	Computational fluid dynamics simulation of hybrid laser-MIG welding of 316 LN stainless steel using hybrid heat source Unni A.K; Vasudevan M.; International Journal of Thermal Sciences (I.F: 4.779); 2023, Vol. 185, Art No. 108042 ISSN 12900729; DOI: 10.1016/j.ijthermalsci.2022.108042
	Spectroscopic determination of the role of vanadyl oxygen in room temperature NH3 sensing by V2O5 nanoparticles Radhakrishnan R.P; Prasad A.K.; Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy (I.F: 4.831); 2023, Vol. 287, Art No. 122092 ISSN 13861425; DOI: 10.1016/j.saa.2022.122092
	Effect of thermomechanical treatment and tempering temperature on microstructure and tensile properties of India specific reduced activation ferritic martensitic steel Anil Kumar P; Vanaja J; Prasad Reddy G.V; Nageswara Rao G.V.S.; Journal of Nuclear Materials (I.F: 3.555); 2023, Vol. 574, Art No. 154186 ISSN 223115; DOI: 10.1016/j.jnucmat.2022.154186
	Numerical simulation of operational transients in sodium-cooled fast reactors Vikram G; Natesan K; Rajendrakumar M.; Nuclear Engineering and Design (I.F: 1.9); 2023, Vol. 402, Art No. 112116 ISSN 295493; DOI: 10.1016/j.nucengdes.2023.112156
	Gold nanoparticle decorated vertical graphene nanosheets composite/hybrid for acetone sensing at room temperature Geramilla M; Muthukumaravel C; Karunakaran U; Sairam T.N.; Materials Science and Engineering B: Solid-State Materials for Advanced Technology (I.F: 3.407); 2023, Vol. 288, Art No. 116211, ISSN 9215107; DOI: 10.1016/j.mseb.2022.116211
	Effect of pre-adsorbed moisture and humidity on I–V characteristics of Si PIN diode Karrevula V.R; Prasad A.K; Mishra V; Tripurasundari S.; Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment (I.F: 1.335); 2023, Vol. 1047, Art No. 167832, ISSN 1689002; DOI: 10.1016/j.nima.2022.167832
	Radiochemical quality control of the radiopharmaceutical, 89SrCl2 produced in FBTR Saha D; Vithya J; Vijayalakshmi S; Chand M; Kumar R.; Applied Radiation and Isotopes (I.F: 1.787); 2023, Vol. 192, Art No. 110566 ISSN 9698043; DOI: 10.1016/j.apradiso.2022.110566
	A biosensor for monitoring of salt stress in plants Sneha M; Ravindranath N.A; Murugesan N; Jayaraman V.; Organic Electronics (I.F: 3.868); 2023, Vol. 113, Art No. 106698 ISSN 15661199; DOI: 10.1016/j.orgel.2022.106698
	Impact of sea-breeze circulation on the characteristics of convective thunderstorms over southeast India Reddy B.R; Srinivas C.V; Venkatraman B.; Meteorology and Atmospheric Physics (I.F: 2.292); 2023, Vol. 135 (1), Art No. 5, ISSN 1777971; DOI: 10.1007/s00703-022-00941-2
	Amino-functionalized graphene oxide membranes for efficient separation of Sr2+ ions Vishwakarma R.K; Narayanam P.K; Umamaheswari R; Polaki S.R.; Journal of Water Process Engineering (I.F: 7.34); 2023; Vol. 51, Art No. 103329 ISSN 22147144; DOI: 10.1016/j.jwpe.2022.103329
	Investigation of axial Flow-Induced vibration in a single fuel Sub-Assembly due to radial clearance Eswaran M; Sajish SD; Anup K.P; Suresh K.S; Dudala NS; Sreedhar BK; Raghupathy S.; Annals of Nuclear Energy (I.F: 1.81); 2023, Vol. 181, Art No. 109546 ISSN 3064549; DOI: 10.1016/j.anucene.2022.109546
	Effect of addition of Nb on phase stability of equiatomic CrFeMoV alloy Saikumaran A; Mythili R.; Materials Chemistry and Physics (I.F: 4.778); 2023, Vol. 294, Art No. 127013 ISSN 2540584; DOI: 10.1016/j.matchemphys.2022.127013
	Pressure-Induced Phase Transition in MultilayeredVanadium Diselenide Nanosheets Mishra K.K; Pandey KK; Sree Raj KA; Rout CS; Ravindran TR; Chandra S; Katiyar RS.; Journal of Physical Chemistry C (I.F: 4.177); 2023, Vol. 127 (1),pp. 368-380; ISSN 19327447; DOI: 10.1021/acs.jpcc.2c06694
	Binder-free vertical graphene nanosheets templated NiO petals for high-performance supercapacitor applications Kumar V.M; Polaki S.R; Krishnan R; Sarguna R.M; Mathews T.; Journal of Alloys and Compounds (I.F: 6.371); 2023, Vol. 931, Art No. 167420 ISSN 9258388; DOI: 10.1016/j.jallcom.2022.167420
	Chromoionophore decorated renewable solid-state polymer monolithic naked eye sensor for the selective sensing and recovery of ultra-trace toxic cadmium ions in aqueous environment Srinivasan P; Madhu D.K; Pedugu Sivaraman S; Kuppusamy S; Nagarajan S; Rao C.V.S.B; Kancharlapalli Chinaraga P; Mohan A.M; Deivasigamani P.; Colloids and Surfaces A: Physicochemical and Engineering Aspects (I.F: 5.518); 2023, Vol. 656, Art No. 130377, ISSN 9277757; DOI: 10.1016/j.colsurfa.2022.130377
	(In Press) Microstructure and Tensile Properties of Dissimilar Weld Joint Between Alloy 800 and Buttered Grade 91 Panneer Selvi S; Prasad Reddy G.V.; Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (I.F: 2.726) ; 2023, ISSN 10735623; DOI: 10.1007/s11661-022-06941-6
	(In Press) Solid solubility of uranium in Ca-phosphate glass and its impact on heat capacity and T g of the glass matrix Jena H; Praveena N; Senapati A.; Journal of Thermal Analysis and Calorimetry (I.F: 4.755); 2023 ISSN 13886150; DOI: 10.1007/s10973-023-11947-2
	(In Press) Integrity Assessment of 10Cr Ferritic Steel/Alloy 617M Dissimilar Metal Weld Joint under Creep Condition Sakthivel T; Dey H.C; Parida P.K; Reddy G.V.P; Vasudevan M; Albert S.K.; Journal of Materials Engineering and Performance (I.F: 2.036); 2023 ISSN 10599495; DOI: 10.1007/s11665-023-07802-y
	(In Press) Ionization-induced annealing of defects in 3C–SiC: Ion channeling and positron annihilation spectroscopy investigations Sreelakshmi N; Umapathy G.R; Abhaya S; David C; Ojha S; Amirthapandian S.; Journal of Materials Research (I.F: 2.909); 2023, ISSN 8842914; DOI: 10.1557/s43578-023-00894-1
	(In Press) Residual stresses study in butt welded joint of Inconel 617 alloy and effect of post weld heat treatment on residual stresses Kumar R; Dey H.C; Pradhan A.K; Mahapatra M.M; Pandey C.; Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (I.F: 2.663); 2023 ISSN 14644207; DOI: 10.1177/14644207221149205
	Purification and quality control of the radiopharmaceutical 89SrCl2 produced in FBTR Saha D; Vithya J; Karunakaran R; Kalaiyarasu T; Rajeswari S; Manoravi P; Chand M; Kumar R.; Journal of Radioanalytical & Nuclear Chemistry (I.F: 1.754) 2023, Vol.332 (1), pp.33-46, ISSN 2365731; DOI: 10.1007/s10967-022-08729-9
	Magnetic nanofluids (Ferrofluids): Recent advances, applications, challenges, and future directions John Philip; Advances in Colloid and Interface Science (I.F: 15.19); 2023, Vol. 311, Art No. 102810, DOI: 10.1016/j.cis.2022.102810
	Synthesis, structure and luminescence properties of bifunctional KCaF3 phosphor influenced by incorporating Eu3+ ions for solid state lighting and TL dosimetry applications Kameshwaran R; Raja A; Kumar R.R; Daniel D.J; Annalakshmi D.O; Aravinth K; Bhargav P.B; Ramasamy P.; Applied Radiation and Isotopes (I.F: 1.787); 2023, Vol. 191, Art No. 110520 ISSN 9698043; DOI: 10.1016/j.apradiso.2022.110566
	(Conf.) Tensile and Ball Indentation Response of Am350 Steel at Room Temperature Kumar Krovvidi S.C.S.P; Ganesh kumar J; Goyal S; Prasad Reddy G.V; Vasudevan M; Raghupathy S.; Lecture Notes in Civil Engineering ; 2023, Vol. 269, pp. 141-151, ISSN 23662557; DOI: 10.1016/j.apradiso.2022.110566
	Development and validation of transient Thermal-Hydraulic model for SFR steam generators Vikram G; Natesan K; Rajendrakumar M; Pathak S.P.; Annals of Nuclear Energy (I.F: 1.81); 2023, Vol. 180, Art No. 109490 ISSN 3064549; DOI: 10.1016/j.anucene.2022.109546
	A Back-stress deconvolution method towards modelling of low cycle fatigue behavior of type 316L(N) stainless steel at room temperature Kumar Pandey D; Kumar Verma P; Bhattacharyya A; Sarkar A.; International Journal of Fatigue (I.F: 5.489); 2023, Vol. 166, Art No. 107297 ISSN 1421123; DOI: 10.1016/j.ijfatigue.2022.107297
	Effect of Surface Preparation on the Air Oxidation Behaviour of Modified 9Cr–1Mo Steel Jagadeeswara Rao C; Archana M; Ningshen S.; Transactions of the Indian Institute of Metals (I.F: 1.391); 2023, Vol. 76 (1), pp. 67-75 ISSN 9722815; DOI: 10.1007/s12666-022-02726-y
	Comparative wear behaviour of Ni-Cr-B-Si hardface coatings made by cold metal transfer and plasma transfer Arc welding processes Mishra R.K; Kumar H; Harmain G.A; Albert S.K.; Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (I.F: 2.663); 2023, Vol. 237 (1), pp. 92-106 ISSN 14644207; DOI: 10.1177/14644207221149205
	Laser intensity mapping across a spatial light modulator to generate uniform and aberration-free focal spots Gupta D.K; Ravindran T.R.; Optics Communications (I.F: 2.335); 2023, Vol. 530, Art No. 129187 ISSN 304018; DOI: 10.1016/j.optcom.2022.129187
	Anomalies of Brillouin Light Scattering in Selected Perovskite Relaxor Ferroelectric Crystals Sivasubramanian V; Ganesamoorthy S; Kojima S.; Materials (I.F: 3.748); 2023, Vol. 16 (2), Art No. 605, ISSN 19961944; DOI: 10.3390/ma16020605
	(In Press) Solvent wash studies for the removal of di-butyl phosphate from spent solvent under simulated PUREX condition Mishra S; Anand P.V; Patra C; Sinha P.K; Mukhopadhyay C; Ravi J; Sivakumar D; Desigan N; Rajesh P; Rajeev R; Dhamodharan K; Velavendan P; Venkatesan K.A; Ananthasivan K.; Journal of Radioanalytical and Nuclear Chemistry (I.F: 1.754); 2023 ISSN 2365731; DOI: 10.1007/s10967-022-08729-9
	Development of marine activated algal-bacterial granule: A novel replacement to the conventional algal remediation processes Uma V.S; Panigrahi S; Chandrasekaran S; Srinivas C.V; Venkatraman B.; Algal Research (I.F: 5.276); 2023, Vol. 69, Art No. 102914 ISSN 22119264; DOI: 10.1016/j.algal.2022.102914
	Quantification of Shear Strain Development in the Through-Thickness Direction During Sliding Wear Neog S.P; Nair A.G; Das Bakshi S; Dasgupta A; Das S.; Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (I.F: 2.726); 2023, Vol. 54 (1), pp. 11-15 ISSN 10735623; DOI: 10.1007/s11661-022-06941-6
	Viscoplastic Constitutive Parameters for Inconel Alloy-625 at 843 K Krovvidi S.C.S.P.K; Goyal S; Veerababu J; Nagesha A; Bhaduri A.K.; Lecture Notes in Mechanical Engineering ; 2023, pp.27-35 ISSN 21954356; DOI: 10.1007/978-981-16-9093-8_25
	Molten salt corrosion of candidate materials in LiCl-KCl eutectic for pyrochemical reprocessing applications: A review Chowdari J.R; Ningshen S.; Corrosion Reviews (I.F: 3.69); 2023; ISSN 3346005; DOI: 10.1515/corrrev-2022-0044
	Unravelling the microstructure – indentation creep resistance relationships for friction stir welded modified 9Cr-1Mo steel and LN-type 316 stainless-steel dissimilar joints Venkata krishna A; Lakshminarayanan A.K; Vasantharaja P; Vasudevan M.; Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (I.F: 2.663); 2023 ISSN 14644207; DOI: 10.1177/14644207221149205
	Structural behavior of CoB under extreme conditions and its high incompressibility Anand Kumar P; Kumar N.R.S; Kaur G; Shekar N.V.C.; Journal of Solid State Chemistry (I.F: 3.656); 2023, Vol.317, Art No. 123702 ISSN 224596; DOI: 10.1016/j.jssc.2022.123702

IGCAR Publication during December 2022 (Source: Scopus)

	Dual-Functional 3-Acetyl-2,5-dimethylthiophene Additive-Assisted Crystallization Control and Trap State Passivation for High-Performance Perovskite Solar Cells Saykar N.G; Iqbal M; Pawar M; Chavan K.T; Mahapatra S.K.; ACS Applied Energy Materials (I.F: 6.959), 2022, ISSN: 2574-0962; DOI: 10.1021/acsaem.2c01881
	Review on surface-characterization applications of X-ray photoelectron spectroscopy (XPS): Recent developments and challenges Krishna D.N.G; Philip J.; Applied Surface Science Advances (I.F: 3.500), 2022, Vol. 12, Art No.100332, ISSN: 2666-5239; DOI: 10.1016/j.apsadv.2022.100332
	High pressure studies on core/shell amorphous carbon nanostructures Bhalerao G.M; Reddy S.S; Shukla B; Chakraborty S; Srihari V; Chandra Shekar N.V.; Bulletin of Materials Science (I.F: 1.783), 2022, Vol. 45 (4), Art No. 219, ISSN: 0250 4707; DOI: 10.1007/s12034-022-02822-1
	Physical insights into the grain size effect on the electrical properties of nanocrystalline La2Zr2 O7 pyrochlores Kaliyaperumal C; Marndi S.K; Sankarakumar A; Paramasivam T.; Ceramics International (I.F: 4.527), 2022,ISSN: 0272-8842; DOI: 10.1016/j.ceramint.2022.11.254
	Application of external flood probabilistic safety assessment methodology to Prototype Fast Breeder Reactor Ramakrishnan M; Sharma P.K; Roshan A.D; Pisharady A.S; Raj M.M; Chithira P; Arul A.J; Bishnoi L.R. Georisk (I.F: 3.868), 2022, ISSN:1749-9518; DOI: 10.1080/17499518.2022.2144636
	Machine Learning-Based Fault Diagnosis for a PWR Nuclear Power Plant Naimi A; Deng J; Doney P; Sheikh-Akbari A; Shimjith S.R; John Arul A.; IEEE Access (I.F: 3.367), 2022 p. 1, ISSN: 2169-3536; DOI: 10.1109/ACCESS.2022.3225966
	Novel  ultraviolet  and  ionizing  radiation  detectors  made  from  TiO2  wide  bandgap semiconductor Chetry P; George E; Sarin P; Das Gupta K; Suresh K; Navas J; David C; Govindraj R.; IEEE Sensors Journal (I.F: 4.325), 2022 p. 1-1, ISSN: 1530-437X; DOI: 10.1109/JSEN.2022.3224809
	Electrical Characteristics and Defect Dynamics Induced by Swift Heavy Ion Irradiation in Pt/Ptx/-β-Ga2O 3 Vertical Schottky Barrier Diodes Manikanthababu N; Sheoran H; Prajna K; Khan S.A; Asokan K; Vas J.V; Medwal R; Panigrahi B.K; Singh R.; IEEE Transactions on Electron Devices (I.F: 2.917), 2022, Vol. 69 (11) pp. 5996-6001, ISSN:0018-9383; DOI: 10.1109/TED.2022.3207702
	Structural Stability and Phase Transitions in Zeolite A: An in Situ High Pressure-High Temperature Investigation Irshad K.A; Kumar N.R.S; Kumar M.M; Jena H.; Inorganic Chemistry (I.F: 5.436), 2022, ISSN:0020-1669; DOI: 10.1021/acs.inorgchem.2c01626
	Assessment of heavy metals and radionuclides (238U, 232Th and 40K) concentration of beach sands collected from East Coast of Tamilnadu, India with multivariate statistical approach Chandrasekaran S; Sankaran Pillai G; Venkatraman B.; International Journal of Environmental Analytical Chemistry  (I.F: 2.160),  2022, Vol. 102 (16) pp.3996-4018, ISSN:0306-7319; DOI: 10.1080/03067319.2020.1779240
	Fatigue Crack Growth Behavior of Nitrogen-Alloyed Low-Carbon Austenitic Stainless Steel at Room Temperature Duraipandi R; NaniBabu M; MoitraA.; JOM (I.F: 2.471), 2022, ISSN:1047-4838; DOI: 10.1007/s11837-022-05622-4
	Excitation-dependent  photoluminescence  intensity  of  monolayer  MoS 2 :  Role  of  heat- dissipating area and phonon-assisted exciton scattering Bhuyan C.A; Madapu K.K; DharaS.; Journal of Applied Physics (I.F: 2.877), 2022, Vol. 132 (20) Art No. 204303, ISSN: 0021-8979; DOI: 10.1063/5.0107470
	Indentation response of model oxide dispersion strengthening alloys after ion irradiation up to 700oc Robertson C; Mathon M.H; Panigrahi B.K; Amirthapandian S; Sojak S; SantraS.; Journal of Applied Physics (I.F: 2.877), 2022, Vol. 132 (17) Art No. 175107, ISSN:0021-8979; DOI: 10.1063/5.0092138
	A study on the electrical properties of flux grown 0.91PZN-0.09PT single crystals for high-performance piezoelectric and pyroelectric device applications Maria Kuruvila K; Dhayanithi D; Manivannan S; Giridharan N.V; Vijayakumar P; Manikandan C; Sarguna R.M; PrabuAmaladass E; Ganesamoorthy S; Varadarajan E; Natarajan V.; Journal of Crystal Growth (I.F: 1.830), 2022, Vol. 598 Art No. 126875, ISSN:0022-0248; DOI: 10.1016/j.jcrysgro.2022.126875
	Design,  fabrication, testing and  operation  of  a  simulation  facility for  high temperature molten salt studies Yadavalli H.V; Krishna Mohan T.V; Rangarajan S; Albert S.K.; Journal of Engineering, Design and Technology  (I.F: 1.470),  2022, Vol. 20 (6)   pp. 1369-1387;  ISSN: 1726-0531; DOI: 10.1108/JEDT-11-2020-0470
	Polyvinylidene Difluoride-SiO 2 -Silane Based Superhydrophobic Coatings on Carbon Steel with Enhanced Corrosion Resistance and Self-Cleaning Property Vanithakumari S.C; Thinaharan C; Philip J.; Journal of Materials Engineering and Performance (I.F: 1.819), 2022, ISSN: 1059-9495; DOI: 10.1007/s11665-022-07530-9
	Dose Response Curve Using Chemically Induced PCC Assay in Peripheral Cells Irradiated In-vitro to 5 MeV Alpha Particles Emitted from Radon Source Meenakshi C; Chandrasekaran S; Rajesh N.P; VenkatramanB.; Journal of Physics: Conference Series (I.F: 0.547), 2022, Vol. 2318 (1) Art No. 12014, ISSN: 1742-6588; DOI: 10.1088/1742-6596/2318/1/012014
	Conversion  of  UO 2   to  UCl 3   using  AlCl 3   in  LiCl-KCl  eutectic  melt  in  presence  of lanthanide (Nd, Pr, Ce, La) oxides: a spectroscopic study Samanta N; Maji S; Kumar S; Venkatesh P; Chandra M; Jain A.; Journal of Radioanalytical and Nuclear Chemistry (I.F:1.373), 2022, ISSN: 0236-5731; DOI: 10.1007/s10967-022-08664-9
	Microstructural manifestation and kinetics of dynamic transformation in a W-modified 9% Cr steel Mandal M; Aashranth B; Samantaray D; Davinci M.A; Shankar V; VasudevanM.; Materials Science and Technology (United Kingdom) (I.F: 1.850), 2022, ISSN:0267-0836; DOI: 10.1080/02670836.2022.2151091
	Numerical Simulation of Sub-Cooled Flow Boiling in a Vertical Annulus Channel Under Near Atmospheric Pressure Conditions Tom S; Mangarjuna Rao P; Venkatraman B; RaghupathyS. ; Nuclear Science and Engineering (I.F: 1.381), 2022, ISSN: 0295639; DOI: 10.1080/00295639.2022.2133948
	Structural, electrical and gas sensing functionality of fabricated Co1-xZnxFe 2 -xNixO 4 (x= 0.0,0.3) nanoparticles Nagpal D; Gnanasekar K.I; Mariappan C.R; Kumar A.; Physica B: Condensed Matter (I.F: 2.436), 2022, Vol. 646  Art No. 414332 ISSN: 0921-4526; DOI: 10.1016/j.physb.2022.414332
	Residual stress, strain and defects: its effect on the band gap of Poly-Ge thin film realized on glass via Au induced layer exchange crystallization process Singh C.K; Mathews T; DharaS.; PhysicaScripta  (I.F: 2.487), 2022, Vol. 97 (12) Art No. 125830 ISSN: 0031-8949; DOI: 10.1088/1402-4896/aca2ef
	Interplay of unique N...π pnicogen and H...π/H... Ohydrogen bonding interactions in the heterodimers of nitromethane with acetylene and benzene as π -electron donors: experimental characterization at low temperatures under isolated conditions with computational corroboration Mahapatra N; Chandra S; Ramanathan N; Sundararajan K.; Physical Chemistry Chemical Physics (I.F: 3.676), 2022, Vol. 24 (46)   pp. 28411-28428, ISSN: 1463-9076; DOI: 10.1039/d2cp03744k
	Design of an innovative smoke sensor and fire alarm panel Shri Vidhatri M.M; Sivaramakrishna M; Chitrakkumar S.; Proceedings of the 2022 3rd International Conference on Intelligent Computing, Instrumentation and Control Technologies: Computational Intelligence for Smart Systems, ICICICT 2022, 11-12 August 2022, Kannur, India,   pp.   1365-1369; ISBN: 978-1-6654-1005-2 DOI:10.1109/ICICICT54557.2022.9917916
	Characterization of the microstructure and mechanical properties of activated tungsten inert gas welded and hot-wire tungsten inert gas welded super austenitic stainless steel AISI 904L Sunny K.T; Korra N.N; Muthukumaran V; Arivazhagan B.; Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2022, ISSN: 1464-4207; DOI: 10.1177/14644207221118438
	A comparison of the extraction behaviour of tris(2-methylbutyl) phosphate and tri-n-alkyl phosphates for the separation of metal ions for U-Zr and U-Pu-Zr; systems by cross-current mode RadiochimicaActa  (I.F: 1.440), 2022, Vol. 110 (12)   pp. 961- 978, ISSN: 0033-8230; DOI: 10.1515/ract-2022-0050
	Comparison of the performance of solvent wash reagents used for the primary cleanup of degraded PUREX solvent; Mishra S; Mukhopadhyaya C; Patra C; Panantharayil V.A; Rajesh P; Sivakumar D; Desigan N; Dhamodharan K; Velavendan P; Rajeev R.P; Venkatesan K.A; AnanthasivanK.; RadiochimicaActa  (I.F: 1.440), 2022, ISSN: 0033-8230; DOI: 10.1515/ract-2022-0079
	A  non-invasive  IR  sensor  technique  to  differentiate  parkinson’s  disease  from  other neurological disorders using autonomic dysfunction as diagnostic criterion Anbalagan B; Anantha S.K; Arjunan S.P; Balasubramanian V; Murugesan M; KalpanaR.; Sensors (I.F: 3.576),  2022, Vol. 22 (1) Art No. 266, ISSN:14248220; DOI: 10.3390/s22010266
	Corrosion Performance of Plasma Sprayed Alumina-40 Wt.% Titania Coated High-Density Graphite in Molten Licl-Kcl Eutectic Salt Sure J; Vishnu D.S.M; Kamachi Mudali U.; Surface Review and Letters (I.F: 1.152), 2022 Art No. 2240003, ISSN: 0218-625X; DOI: 10.1142/S0218625X22400030
	A non-destructive assay of plutonium based nuclear fuels by in-house developed small volume calorimeter Bootharajan M; Murthy A.S.R; Rao J.S.B; Sreenivasulu B; Bera S; Sundararajan K; Kumar R; Jayaraman V; SivaramanN.; ThermochimicaActa (I.F: 3.115), 2022, Vol. 717  Art No. 179355, ISSN: 0040-6031; DOI:10.1016/j.tca.2022.179355

IGCAR Publication during November 2022 (Source: Scopus)

 

	Addressing the load-ringing phenomena observed at intermediate strain rates to obtain true material response using ensemble empirical mode decomposition; TeenaMouniC; Fayaz Khan P; Ravishankar C; Krishnan S.A; Albert S.K. Materials Letters, 2022, Vol.325, Art.#132778,Doi:, 10.1016/j.matlet.2022.132778, ISSN: 0167-577X
	Ag nanowires based SERS substrates with very high enhancement factor; Francis M.K; Sahu B.K; Bhargav P.B; C B; Ahmed N; Das A; Dhara S., Physica E: Low-Dimensional Systems and Nanostructures, 2022, Vol.137, Art.# 115080, Doi: 10.1016/j.physe.2021.115080, ISSN: 1386-9477
	Ambiguity in indexing electron diffraction patterns of R3 crystals; Mohan S. Actacrystallographica. Section A, Foundations and advances, 2022, Vol.78, pp. 507-514, Doi: 10.1107/S2053273322008907, ISSN: 2053-2733
	An ab-initio probe to predict the stability of SrLa, Sr2La and Sr3La intermetallic alloys with the aid of high pressures; JayalakshmiV; Jaiganesh G; Rameshkumar S. Computational and Theoretical Chemistry, 2022, Vol. 1211, Art.# 113660, Doi: 10.1016/j.comptc.2022.113660, ISSN: 2210-271X
	An advanced mean field dislocation density reliant physical model to predict the creep deformation of 304HCu austenitic stainless steel; Mehrotra P; Kumar N; George A; Sahoo K.C; Ganesan V; Ahmadi M.R; Trivedi S; Yadav S.D. Materials Today Communications, 2022, Vol. 32, Art.# 104128,Doi: 10.1016/j.mtcomm.2022.104128, ISSN: 2352-4928
	An arbitrary-order continuous sliding mode control technique for nonlinear PWR-type nuclear power plants; Surjagade P.V; Deng J; Vajpayee V; Becerra V.M; Shimjith S.R; Arul A.J. Progress in Nuclear Energy, 2022, Vol. 150, Art.# 104309,Doi: 10.1016/j.pnucene.2022.104309, ISSN: 0149-1970
	An EBSD based investigation on the deformation mechanisms under HCF-creep interaction in a Ni-based superalloy (alloy 617M); Sarkar A; Yadav S.D; Nagesha A. Materials Science and Engineering A, 2022, Vol. 832, Art.# 142399, Doi: 10.1016/j.msea.2021.142399, ISSN: 0921-5093
	Analysis of coal ash samples from thermal power plants of India for their gallium content using NAA and EDXRF techniques; Chand M; Ashok Kumar G.V.S; Senthilvadivu R; Usha Lakshmi K; Serajuddin M; Ramadevi G; Kumar R. Applied Radiation and Isotopes, 2022, Vol. 187, Art.# 110336, Doi: 10.1016/j.apradiso.2022.110336, ISSN: 0969-8043
	Analysis of structural transformation in nanocrystalline Y2O3 during high energy ball milling; B.R. V.K; DasguptaA; Ghosh C; Sinha S.K. Journal of Alloys and Compounds, 2022, Vol. 900, Art.# 163550, Doi: 10.1016/j.jallcom.2021.163550, ISSN: 0925-8388
	Analytics at the nanometer and nanosecond scales by short electron pulses in an electron microscope; Picher M; Sinha S.K; LaGrange T; Banhart F. ChemTexts, 2022, Vol.8, (4), Art.# 18,Doi: 10.1007/s40828-022-00169-y, ISSN: 2199-3793
	Anisotropy and variability in thermal creep behaviour of Zr-2.5Nb pressure tube; Patel V; Gopalan A; Khandelwal H.K; Keskar N; Pushpalatha Devi Y; Singh R.N. International Journal of Pressure Vessels and Piping, 2022, Vol. 200, Art.# 104844, Doi:   10.1016/j.ijpvp.2022.104844, ISSN:0308-0161
	Anomalous Critical Field Dependence of Cr-Nb-Cr Trilayers on Niobium Thickness; Vaidhyanathan L.S; Baskaran R; Baisnab D.K; Chakravarty S. Indian Journal of Pure and Applied Physics, 2022, Vol. 60, (3), pp. 198-203, ISSN: 0019-5596
	Approach towards qualification of TCP/IP network components of PFBR; Gour A; Mathews T; Behera R.P. Nuclear Engineering and Technology, 2022, Vol. 54, (11), pp. 3975-3984, Doi: 10.1016/j.net.2022.06.015, ISSN: 1738-5733
	Assay of an alpha solid waste drum using passive neutron counting; Sivakumar P; Govindan P; Ananthasivan K. Journal of Radioanalytical and Nuclear Chemistry, 2022, Vol. 331(9), pp. 3857-3864, Doi: 10.1007/s10967-022-08400-3, ISSN: 0236-5731
	Assay of nuclear grade primary sodium in the fast breeder test reactor for radionuclides and corrosion elements; Rao J.S.B; Senthilvadivu R; Kumar G.V.S.A; Suriyanarayanan A; Sundararajan K; Kumar R. Progress in Nuclear Energy, 2022, Vol. 152, Art.# 104394, Doi: 10.1016/j.pnucene.2022.104394, ISSN: 0149-1970
	Assessment of activation volume in 304L SS at high temperatures; Christopher J; Singh B.K; Reddy G.V.P; Vasudevan M. Materials Science and Engineering A, 2022, Vol. 860, Art.# 144326, Doi: 10.1016/j.msea.2022.144326, ISSN: 0921-5093
	Atomic scale insights on the growth of BiFeO3 nanoparticles; Parvathy N.S; Govindaraj R. Scientific Reports, 2022, Vol. 12, (1), Art.# 4758, Doi: 10.1038/s41598-022-08687-y, ISSN:2045-2322
	CalotropisGiganteaFiber A Biogenic Reinforcement Material for Europium Substituted  Hydroxyapatite/Poly(3,4-propylenedioxythiophene) Matrix: A Novel Ternary Composite for Biomedical Applications; Raji R; Elangomannan S; Subramani R; Louis K; Periasamy M; Dhanaraj G. ACS Omega, 2022, Vol. 7(7), pp. 6024-6034,Doi: 10.1021/acsomega.1c06372, ISSN: 2470-1343
	Charging and dynamics of polystyrene latex aerosols under bipolar and unipolar ion field  ELPI measurements and comparison with charging theories; Pujala U; Venkatesan S; Kumar A; Narayanam S.P;Challa V.S; Balasubramanian V. Journal of Electrostatics, 2022, Vol. 117, Art.# 103713, Doi: 10.1016/j.elstat.2022.103713, ISSN: 0304-3886
	Comprehensive analysis of evolution of serrated hysteresis loops of Alloy 617 M during low cycle fatigue; Shankar V; Kumar A. Materials Today Communications, 2022, Vol. 33, Art.#, 104893, Doi: 10.1016/j.mtcomm.2022.104893, ISSN: 2352-4928
	Compressibility studies of RE6UO12 at extreme conditions of pressure; Shukla B; Kumar N.R.S; Jena H; Upadhyay A; Shekar N.V.C. Bulletin of Materials Science, 2022, Vol. 45(4), Art.# 215, Doi: 10.1007/s12034-022-02788-0, ISSN: 0250-4707
	Deformation behaviour and strain rate sensitivity of 304L SS at elevated temperatures; Singh B.K; Christopher J; Selvi P; Mishra J; Reddy G.V.P. Materials at High Temperatures, 2022, Vol. 39(5), pp. 352-362, Doi:  10.1080/09603409.2022.2124753,  ISSN:  0960-3409
	Design, analysis and experimental qualification of gripper bellows for FBTR control rod drive mechanism, Kumar Krovvidi S.C.S.P; Ramesh E; Iyappan R; Kolanjiappan A; Chandramouli S; Sreedhar B.K; Suresh Kumar K.V; Raghupathy S; BhaduriA.K. International Journal of Nuclear Energy Science and Technology, 2022, Vol. 15(3-4), pp. 251- 270,Doi: 10.1504/ijnest.2022.126062, ISSN: 0265-931X
	Development of a numerical model for sector-average plume gamma dose and its validation with dose rate measurements at Kalpakkam NPP site, India; Karmakar S; Srinivas C.V; Rakesh P.T; Gopalakrishnan V; Chandrasekaran S; Athmalingam S; Venkatraman  B. Journal of Environmental Radioactivity, 2022, Vol. 255, Art.# 107029, Doi: 10.1016/j.jenvrad.2022.107029, ISSN: 0265-931X
	Effect of europium on the structural and thermal properties of pristine iron phosphate glass; Vijay S.K; Madhavan R.R; Chakraborty S; Jain A; Joseph K. Journal of Thermal Analysis and Calorimetry, 2022, Doi: 10.1007/s10973-022-11749-y, ISSN: 1388-6150
	Effect of flaw orientation on magnetic flux leakage and remote field eddy current inspection of small diameter steel tubes; Singh W.S; Thirunavukkarasu S; Kumar A. Nondestructive Testing and Evaluation, 2022, Doi: 10.1080/10589759.2022.2137508, ISSN: 1058-9759
	Effect of TBP on the Coordination Process of Eu(III) with T2EHDGA: A Luminescence Spectroscopy Investigation; Rout A; Kumar S, Ramanathan N. ChemistrySelect, 2022, Vol. 7 ( 40), Art.# e202202799, Doi: 10.1002/slct.202202799, ISSN: 2365-6549
	Effect of U on the photoluminescence of Pr and structural properties of U/Pr doped and co- doped Li2O–ZnO–SrO borophosphate glass; Ramakrishna P; Padhi R.K; Parida S.K; Mohapatra D.K; Jena H; Panigrahi B.S. Optical Materials, 2022, Vol. 134, Art.# 113121, Doi: 10.1016/j.optmat.2022.113121, ISSN: 0925-3467
	Equimolar ZnO-CdS nanocomposite for enhanced photocatalytic performance; Saxena N; Sondhi H; Sharma R; Joshi M; Amirthapandian S; Rajput P; Sinha O.P; Krishna R. Chemical Physics Impact, 2022, Vol. 5, Art.# 100119, Doi: 10.1016/j.chphi.2022.100119, ISSN: 2667-0224
	Fabrication of free standing graphene oxide membranes for efficient adsorptive removal of cationic dyes; Narayanam P.K; Vishwakarma R.K; Polaki S.R. Journal of Molecular Liquids, 2022, Vol. 368, Art.# 120787, Doi: 10.1016/j.molliq.2022.120787, ISSN: 0167-7322
	High pressure investigations on neutron irradiated ferroboron; Kumar A; Saha U; Radha E; Devan K; Kumar N.R.S; Venkiteswaran C.N; Divakar R; Chandra Shekar N.V. Bulletin of Materials Science, 2022, Vol. 45(4), Art.# 233, Doi: 10.1007/s12034-022-02818-x, ISSN: 0250-4707
	High pressure structural stability of UO2 by evolutionary algorithm; Sornadurai D. Bulletin of Materials Science, 2022, Vol. 45(4), Art.# 228, Doi: 10.1007/s12034-022-02819-w, ISSN: 0250-4707
	Hybrid Welding Process in Lieu of Conventional Practices for Fabrication of Austenitic Stainless Steel AISI 304L Components in Nuclear Facility; Kuppusamy M.V;  Venkatraman B; Albert S.K; Athmalingam S. Journal of Materials Engineering and Performance, 2022, Doi:  10.1007/s11665-022-07658-8,  ISSN:1059-9495
	Hydraulic design optimization of spherical header for future fast reactors of India; Chauhan A.K; Rajendrakumar M; Natesan K. Nuclear Engineering and Design Vol. 399, Art.# 112017, Doi: 10.1016/j.nucengdes.2022.112017, ISSN:0029-5493
	(In Press) Investigating the Magnetocaloric Properties of Magnetically Frustrated Delafossite: AgCrO2; Murugan K; Sathyanarayana A.T; Govindaraj P; Paulraj S; Mani A; Venugopal K. Journal of Electronic Materials, 2022, Doi: 10.1007/s11664-022-10014-0, ISSN:0361-5235
	Measurement of Radiation Absorbed Dose Effects in SRAM-Based FPGAs; Nidhin T.S; Bhattacharyya A; Gour A; Behera R.P; Jayanthi T; Velusamy K. IETE Journal of Research, 2022, Vol.68, (5), pp. 3418-3427,Doi: 10.1080/03772063.2020.1768159, ISSN:0377-2063
	Microstructure and substrate dependent enhanced critical current density in Pb-substituted Bi-based high temperature superconducting thin films; Gayathri V; T Sathyanarayana A; Vinod K; GeethaKumary T; Mani A. PhysicaScripta 2022, Vol. 97(12), Art.# 125823,Doi: 10.1088/1402-4896/aca12b, ISSN: 0031-8949
	Modulational Instability Analysis in An Isotropic Ferromagnetic Nanowire with Higher Order Octopole-Dipole Interaction; Pavithra T; Kavitha L; Prabhu, Mani A. Springer Proceedings in Complexity, 2022, pp. 1209-1218, Doi: 10.1007/978-3-030-99792-2-102, ISSN: 2213-8684
	Neutronics simulation of China Experimental Fast Reactor start-up tests using FARCOB and ERANOS 2.1 code systems; Bachchan A; Devan K; Riyas A. Nuclear Engineering and Design, 2022, Vol. 399, Art.# 112038, Doi: 10.1016/j.nucengdes.2022.112038, ISSN: 0029-5493
	(In Press) Novel green emitting Tb3+ doped KCaF3 phosphor for WLEDs and TLD applications; Kameshwaran R; Annalakshmi O;Aravinth K; Bhargav P.B. Ceramics International, 2022, Doi: 10.1016/j.ceramint.2022.10.316, ISSN: 0272-8842
	Numerical investigation of thermal failure of a fuel subassembly foot wall during molten  material relocation under various flow blockage scenarios in sodium-cooled fast reactor; Kumar Panigrahi P; Velusamy K; Natesan K; Devan K. Nuclear Engineering and Design, 2022, Vol. 400, Art.# 112047, Doi: 10.1016/j.nucengdes.2022.112047, ISSN: 0029-5493
	(In Press) Optimisation of nuclear reactor primary coolant design and maintenance parameters; Wootton M.J; Zhou Y; Andrews J.D; Smith R; Arul J; Vinod G; Muruva H.P; Garg V. Applied Stochastic Models in Business and Industry, 2022,Doi: 10.1002/asmb.2722, ISSN: 1524-1904
	Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL; Babu M.N; Anandan V; Parthasarathi N.L; Yildirim C.V; Babu M.D; Das S.R. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022, Vol. 44(12), Art.# 591, Doi: 10.1007/s40430-022-03909-w, ISSN: 1678-5878
	Starch-Assisted Synthesis of Bi2S3Nanoparticles for Enhanced Dielectric and Antibacterial Applications; Uddin I; Abzal S.M; Kalyan K; Janga S; Rath A; Patel R; Gupta D.K; Ravindran T.R; Ateeq H; Khan M.S; Dash J.K. ACS Omega, 2022, Doi: 10.1021/acsomega.2c05593, ISSN: 2470-1343
	Studies on synthesis, structural and thermal properties of sodium niobium phosphate  glasses for nuclear waste immobilization applications; Senapati A; Barik S.K; Venkata Krishnan R; Chakraborty S; Jena H. Journal of Thermal Analysis and Calorimetry, 2022, Doi: 10.1007/s10973-022-11760-3, ISSN: 1388-6150
	Thermal analysis of thin P91 steel using FlexPDE and SYSWELD; Zubairuddin M; Albert S.K; Reddy M.S; Ali B; Varaprasad B; Mishra A; Das P.K; Elumalai P.V. Materials Today: Proceedings, 2022, Doi: 10.1016/j.matpr.2022.09.385, ISSN: 2214-7853

IGCAR Publication during October 2022 (Source: Scopus)

	In Situ Electrical Characteristics and Defect Dynamics Induced by Swift Heavy Ion Irradiation in Pt/PtO-O Vertical Schottky Barrier Diodes; Manikanthababu N; Sheoran H; Prajna K; Khan S.A; Asokan K; Vas J.V; Medwal R; Panigrahi B.K; Singh R. IEEE Transactions on Electron Devices, 2022, pp.1-6, DOI: 10.1109/TED.2022.3207702; ISSN: 0018-9383
	A machine learning approach to nonlinear ultrasonics for classifying annealing conditions in austenitic stainless steel; Abraham S.T; Mohan M; Chelliah P; Balasubramaniam K; Venkatraman B. Journal of Applied Physics; 2022, Vol.132 (11), Art.# 114902, DOI:10.1063/5.0102337; ISSN: 0021-8979
	A Novel Methodology of Using Nonsolvent in Achieving Ultraclean Transferred Monolayer MoS2; Bhuyan C.A; Madapu K.K; Prabakar K; Das A; Polaki S.R; Sinha S.K; Dhara S. Advanced Materials Interfaces; 2022, Vol.9 (13), Art.# 2200030, DOI: 10.1002/admi.202200030; ISSN: 2196-7350
	A review on recent advances in graphene oxide-based composite coatings for anticorrosion applications; Jena G; Philip J. Progress in Organic Coatings; 2022, Vol.173, Art.# 107208, DOI: 10.1016/j.porgcoat.2022.107208; ISSN: 0300-9440
	Analytics at the nanometer and nanosecond scales by short electron pulses in an electron microscope; Picher M; Sinha S.K; LaGrange T; Banhart F. ChemTexts; 2022, Vol.8 (4), Art.# 18, DOI: 10.1007/s40828-022-00169-y; ISSN: 2199-3793
	Assay of nuclear grade primary sodium in the fast breeder test reactor for radionuclides and corrosion elements; Rao J.S.B; Senthilvadivu R; Kumar G.V.S.A; Suriyanarayanan A; Sundararajan K; Kumar R. Progress in Nuclear Energy; 2022, Vol. 152, Art.# 104394, DOI: 10.1016/j.pnucene.2022.104394; ISSN: 0149-1970
	Degradation of Incoloy-800HT in molten FLiNaK salt at high temperatures; Harinath Y.V; Chandramohan P; Anandkumar B; Mohan T.V.K; Rangarajan S; Albert S.K. Materials and Corrosion; 2022, Vol. 73 (5) , pp.771-783, DOI:10.1002/maco.202112758; ISSN: 0947-5117
	Density Functional Theory Studies on Dimension-Controlled Self-Assemblies from Cadmium Telluride Nanoclusters: Implications for Solar Cell Applications; Chavan K.T; Chandra S. ACS Applied Nano Materials; 2022, Vol.5 (8), pp.11129-11136, DOI: 10.1021/acsanm.2c02297; ISSN: 2574-0970
	Development of a numerical model for sector-average plume gamma dose and its validation with dose rate measurements at Kalpakkam NPP site, India; Karmakar S; Srinivas C.V; Rakesh P.T; Gopalakrishnan V; Chandrasekaran S; Athmalingam S; Venkatraman B. Journal of Environmental Radioactivity; 2022, Vol.255, Art.# 107029, DOI:10.1016/j.jenvrad.2022.107029; ISSN: 0265-931X
	Dose Response Curve Using Chemically Induced PCC Assay in Peripheral Cells Irradiated Invitro to 5 MeV Alpha Particles Emitted from Radon Source; Meenakshi C; Chandrasekaran S; Rajesh N.P; Venkatraman B. Journal of Physics: Conference Series; 2022, Vol. 2318(1), Art.# 12014, DOI:10.1088/1742-6596/2318/1/012014; ISSN: 1742-6588
	Effect of Thermal Aging on Deformation and Fracture Properties of SS 304HCu; Shanthi G; Nanibabu M; Krishnan S.A; Moitra A; Vasudevan M. Journal of Materials Engineering and Performance; 2022, DOI:10.1007/s11665-022-07408-w; ISSN: 1059-9495
	Effect of X-ray exposure on nano-mechanical properties of multi-walled carbon nanotube incorporated silicone polymer nanocomposites: An AFM-based study; Vadivel M; Jayakumar S; Lahiri B.B; Philip J. Journal of Elastomers and Plastics; 2022, Vol. 54(7) , pp.1172-1201, DOI: 10.1177/00952443221133237; ISSN: 0095-2443
	Electrochemical and spectroscopic analysis of thermochemical conversion of UO2 to UCl3 using AlCl3 and Al in Li ClKCl eutectic; Samanta N; Kumar S; Maji S; Chandra M; Venkatesh P; Jain A. Progress in Nuclear Energy; 2022, Vol.153, Art.# 104429 , DOI:10.1016/j.pnucene.2022.104429; ISSN: 0149-1970
	Enhanced Spin Transfer Torque in Single Barrier Model Tunnel Junctions Containing Disordered Interface; Harikumar P; Chandra S. SPIN; 2022, Art.# 2250018, DOI: 10.1142/S2010324722500187; ISSN: 2010-3247
	Estimation of UTS from small punch test using an improved method; Pandey A.V; Karthik V; Shaik A.R; Kolhatkar A; R. D. International Journal of Pressure Vessels and Piping; 2022, Vol. 200, Art.# 104818, DOI: 10.1016/j.ijpvp.2022.104818; ISSN: 0308-0161
	Evaluation of leaching behaviour of Nd from Ca10-xNdx(PO4)F2, (x = 1.2) matrix and its borosilicate glass-bonded analogues by neutron activation and ICP-OES analysis; Lindsay S.A; Sriram S; Chand M; Annapoorani S; Lakshmi K.U; Jena H; Vijayalakshmi S; Kumar R; Jayaraman V. Chemical Papers; 2022, DOI:10.1007/s11696-022-02391-x; ISSN: 0366-6352
	Experimental determination of phase equilibria and phase stability in the Al-U system by using DSC, spot-technique and XRD; Samanta B; Anand Kumar P; Balakrishnan S Thermochimica Acta; 2022, Vol. 718, Art.# 179369, DOI:10.1016/j.tca.2022.179369; ISSN: 406031
	Highly Durable Antimicrobial Tantalum Nitride/Copper Coatings on Stainless Steel Deposited by Pulsed Magnetron Sputtering; Elangovan T; Balasankar A; Arokiyaraj S; Rajagopalan R; George R.P; Oh T.H; Kuppusami P; Ramasundaram S. Micromachines; 2022, Vol.13(9), Art.# 1411 , DOI:10.3390/mi13091411; ISSN: 2072-666X
	High-pressure studies on pristine and Pb-substituted Bi-based high-temperature superconductor; Gayathri V; Sathyanarayana A.T; Shukla B; Kumary T.G; Kumar N.R.S; Chandra S; Mani A. Bulletin of Materials Science; 2022, Vol. 45(4), Art.# 207, DOI:10.1007/s12034-022-02797-z; ISSN: 0250-4707
	Hydrodynamic Properties of Tris(2-methylbutyl) Phosphate and Tri-n-alkyl Phosphates in n-Dodecane–A Comparative Investigation between Unirradiated and Gamma Irradiated Solvent Systems; Sarkar S; Rajeswari S; Suresh A; Sivaraman N. Solvent Extraction and Ion Exchange; 2022, Vol. 40(5), pp.455-476, DOI:10.1080/07366299.2021.1972648; ISSN: 0736-6299
	Impact of gamma radiation on 8051 microcontroller performance ; Sharma C; Rajesh P; Behera R.P; Amirthapandian S. Nuclear Engineering and Technology; 2022, DOI: 10.1016/j.net.2022.08.021; ISSN: 1738-5733
	Influence of End Milling Process Variables on Material Removal Rate and Surface Roughness of Direct Metal Laser Sintered Inconel 718 Plate; Parthasarathi N.L; Veeman D; Dhamodharan D; Borah U; Ravichandran M; Natrayan L; Degife Mammo W. Advances in Materials Science and Engineering; 2022, Art.# 9101820, DOI: 10.1155/2022/9101820; ISSN: 1687-8434
	Insights into the Third Phase Formation Behaviour of N,N-Didodecyl-N™,N™-Dioctyl Diglycolamide in n-Dodecane Investigated by Dynamic Light Scattering and FTIR Spectroscopy; Narayanan P; Swami K.R; Prathibha T; Venkatesan K.A. ChemistrySelect; 2022, Vol. 7(37), Art.# 202202610, DOI: 10.1002/slct.202202610; ISSN: 2365-6549
	Insights on the role of defects on the magnetic and magneto electric coupling effects in nano BiFeO3; Panda A; Parvathy N.S; Govindaraj R; Vinod K. Journal of Alloys and Compounds; 2022, Vol. 897, Art.# 162738, DOI: 10.1016/.jallcom.2021.162738; ISSN: 0925-8388
	Integrated use of regional weather forecasting and crop modeling for water stress assessment on rice yield; Rajasivaranjan T; Anandhi A; Patel N.R; Irannezhad M; Srinivas C.V; Veluswamy K; Surendran U; Raja P. Scientific Reports; 2022, Vol. 12(1), Art.# 16985, DOI: 10.1038/s41598-022-19750-z; ISSN: 2045-2322
	Interaction of krypton and xenon with sodium and activated charcoal: Identification and modeling using gas chromatography and density functional theory; Ramanathan N; Bootharajan M; Kumar G.V.S.A; Sundararajan K; Murthy A.S.R; Chandra S; Jayaraman V. Journal of Nuclear Materials; 2022, Vol. 558, Art.# 153326, DOI: 10.1016/j.jnucmat.2021.153326; ISSN: 0022-3115
	Interaction of magnesium ions in high temperature aqueous solution with Incoloy-800; Sinu C, Veena S, Subramanian H, Bera S, Aji Kumar P.K., Chandramohan P, Tom Mathews, Krishna Mohan TV, Materials Today Communications; 2022, Vol. 33, Art.# 104454, DOI: 10.1016/j.mtcomm.2022.104454; ISSN: 2352-4928
	Inter-droplet force between magnetically polarizable Pickering oil-in-water nanoemulsions stabilized with γ-Al2O3 nanoparticles: Role of electrostatic and electric dipolar interactions; Nandy M; Lahiri B.B; Philip J. Journal of Colloid and Interface Science; 2022, Vol. 607, pp.1671-1686, DOI: 10.1016/j.jcis.2021.09.025; ISSN: 0021-9797
	Interplay of piezoresponse and magnetic behaviour in Bi0.9A0.1FeO2.95 (A = Ba, Ca) and Bi0.9Ba0.05Ca0.05FeO2.95 co-doped ceramics; Mangamma G; Das B.K; Ramachandran B; Ramachandra Rao M.S; Sairam T.N. RSC Advances; 2022, Vol. 12(4), pp.2443-2453, DOI: 10.1039/d1ra08141a; ISSN: 2046-2069
	Investigating sedimentation process in the plutonium reconversion using Eulerian Two-Fluid simulations and experimental verification; Panda S.K; Mishra V.K; Vishnu Anand P; Rajeev R; Venkatesan K.A; Ananthasivan K. Nuclear Engineering and Design; 2022, Vol. 398, Art.# 111955, DOI: 10.1016/j.nucengdes.2022.111955;ISSN: 295493
	Kinetics of dissolution of simulated (UCe) MOX fuel pellet in nitric acid; Augustine E; Desigan N; Rajeev R; Pandey N.K; Joshi J.B. Journal of Radioanalytical and Nuclear Chemistry; 2022, DOI: 10.1007/s10967-022-08582-w; ISSN: 0236-5731
	Localised corrosion susceptibility of nitrogen-containing type 316LN stainless steel in cold work and thermally aged conditions; Mannepalli S; Ravi Shankar A; Ningshen S; Philip J. Corrosion Engineering Science and Technology; 2022, DOI: 10.1080/1478422X.2022.2126407; ISSN: 1478-422X
	Numerical simulation and validation of residual stresses and distortion in type 316L(N) stainless steel weld joints fabricated by advanced welding techniques; Pavan AR; Arivazhagan B; Vasudevan M; Sharma G.K; CIRP Journal of Manufacturing Science and Technology; 2022, Vol. 39, pp.294-307, DOI: 10.1016/j.cirpj.2022.08.010; ISSN: 1755-5817
	Performance of phosphor embedded plastic scintillators through thin film coating; Rajakrishna K; Dhanasekaran A; Yuvaraj N; Ajoy K; Venkatraman B; Jose M.; Journal of Instrumentation; 2022, Vol. 17(8), Art.# C08015, DOI:10.1088/1748-0221/17/08/C08015; ISSN: 1748-0221
	Polyvinylidene Difluoride-SiO2-Silane Based Superhydrophobic Coatings on Carbon Steel with Enhanced Corrosion Resistance and Self-Cleaning Property ; Vanithakumari S.C; Thinaharan C; Philip J. Journal of Materials Engineering and Performance; 2022, DOI: 10.1007/s11665-022-07530-9; ISSN: 1059-9495
	Pre-irradiation of surfactants to enhance their capacity to solubilise drugs and dyes; Dash S; Rajesh P; Joshi R.G; Rajeswari S; Karunanithi P. Journal of the Indian Chemical Society; 2022, Vol. 99(11), Art.# 100751, DOI: 10.1016/j.jics.2022.100751; ISSN: 0019-4522
	Pressure-induced variations of medium-range order in B2O3 glasses; Chakraborty S; Sivasubramanian V; Singh M.N; Upadhyay A; Sinha A.K; Ravindran T.R. Bulletin of Materials Science; 2022 , Vol. 45(4), Art.# 190, DOI: 10.1007/s12034-022-02772-8; ISSN: 0250-4707
	RGO nanosheet wrapped β-phase NiCu2S nanorods for advanced supercapacitor applications; Kandhasamy N; Preethi L.K; Mani D; Walczak L; Mathews T; Venkatachalam R. Environmental Science and Pollution Research; 2022, DOI:10.1007/s11356-022-23359-0; ISSN: 0944-1344
	Support vector machine based methodology for classification of thermal images pertaining to breast cancer; Periyasamy S; Prakasarao A; Menaka M; Venkatraman B; Jayashree M. Journal of Thermal Biology; 2022, Vol. 110, Art.# 103337, DOI: 10.1016/j.jtherbio.2022.103337; ISSN: 0306-4565
	Synthesis and characterization of rare-earth doped aluminium phosphate glasses; Barik S.K; Senapati A; Balakrishnan S; Ananthasivan K. Progress in Nuclear Energy; 2022, VOL. 152, Art.# 104372, DOI: 10.1016/j.pnucene.2022.104372; ISSN: 0149-1970
	The Tribocorrosion Behaviour and its Mechanisms of Type 304L Stainless Steel in Nitric Acid Media; Priya R; Ningshen S. Journal of Materials Engineering and Performance; 2022, DOI: 10.1007/s11665-022-07511-y; ISSN: 1059-9495
	Transport and disposal of radioactive wastes in nuclear industry; Subba Rao T; Velraj P; Panigrahi S. Microbial Biodegradation and Bioremediation: Techniques and Case Studies for Environmental Pollution; 2022, pp. 419-440, DOI: 10.1016/B978-0-323-85455-9.00027-8>
	Two-Parametric Nature of Fatigue and the Intrinsic Mechanisms; Sadananda K; Iyyer N; Vasudevan A.K; Nani Babu M; Phan N. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science; 2022, DOI: 10.1007/s11661-022-06826-8; ISSN: 1073-5623
	Understanding the coordination behavior of quaternary ammonium and phosphonium nitrate ionic liquids under gamma irradiation: A combined spectroscopic investigation; Rout A; Kumar S; Ramanathan N. Journal of Molecular Liquids; 2022, Vol. 367, Art.# 120484, DOI: 10.1016/j.molliq.2022.120484; ISSN: 0167-7322
	Unique Dispersion-Induced Tetrel Bond with Co-operative Sigma-hole-Induced Pnicogen Bond in the POCl3-Acetone Heterodimer: Experimental Confirmation at Low Temperatures; Suryaprasad B; Chandra S; Ramanathan N; Sundararajan K. Journal of Physical Chemistry A; 2022, Vol.126(38) , pp.6637-6647, DOI: 10.1021/acs.jpca.2c04635; ISSN:1089-5639

Newsletter

IGCAR Publications - 2022

IGCAR Thesis